Set Screw Cone Point DIN 914

Hex socket cone-point set screw that bites into shaft for locking.

Variants: 11 types
Diameter: 3–10 mm
Length: 7.5–29 mm
Material: Steel
Tolerance: 6g

Dimension SchematicBAGA-914-06 — representative variant of this family

Code & Size Table

Code, dimensions and tolerance for all 11 variants.

Code	Diameter (mm)	Length (mm)	Feature	Tolerance	Std
BAGA-914-01	3	7.5	M3 · taper	6g	DIN 914 – cone point, hex socket 1.5mm
BAGA-914-02	3	11.5	M3 · taper	6g	DIN 914 – cone point
BAGA-914-03	4	10	M4 · taper	6g	DIN 914 – cone point, hex socket 2mm
BAGA-914-04	4	14	M4 · taper	6g	DIN 914 – cone point
BAGA-914-05	5	10.5	M5 · taper	6g	DIN 914 – cone point, hex socket 2.5mm
BAGA-914-06	5	18.5	M5 · taper	6g	DIN 914 – cone point
BAGA-914-07	6	13	M6 · taper	6g	DIN 914 – cone point, hex socket 3mm
BAGA-914-08	6	23	M6 · taper	6g	DIN 914 – cone point
BAGA-914-09	8	16	M8 · taper	6g	DIN 914 – cone point, hex socket 4mm
BAGA-914-10	8	29	M8 · taper	6g	DIN 914 – cone point
BAGA-914-11	10	21	M10 · taper	6g	DIN 914 – cone point, hex socket 5mm

Material & Tolerance

The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.

Steel (standard)
Stainless Steel
Brass
Aluminium

General Notes

This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
This data sheet carries no prices; contact us with the part code for pricing and a quote.

The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/en/arac/sw20-parca-katalogu/baglanti/baglanti-setuskur-konik-din914#BAGA-914-06

Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com