Nozzle Manufacturing — CNC Swiss-Type Turning
Spray, mist, fan, air-atomizing and dosing nozzles: 14 families, 132 types. CNC-turned to ⌀5–19.6 mm. Steel, stainless, brass; custom parts and quote.
Part Families
Conical Spray Nozzle
Threaded-body spray nozzle producing a full-cone pattern from its conical tip.
⌀9.2–19.6 · L 18–48 mm
10 types
Mist Nozzle
Fine-orifice threaded nozzle producing a fine-droplet mist at high pressure.
⌀6.4–19.6 · L 13–26 mm
10 types
Fan Nozzle
Threaded nozzle with a flat slit tip spraying a flat fan pattern.
⌀8.1–19.6 · L 14–36 mm
10 types
Tapered Jet Nozzle
Threaded nozzle with a long tapered body producing a tight solid-jet stream.
⌀8.1–19.6 · L 20–67 mm
10 types
Multi-Hole Nozzle
Threaded nozzle spraying through multiple holes across a flat tip face.
⌀9.2–19.6 · L 17–41 mm
9 types
Hollow-Cone Nozzle
Threaded nozzle with a swirl chamber producing a ring-shaped hollow-cone pattern.
⌀8.1–19.6 · L 15–39 mm
10 types
Air-Atomizing Nozzle
Stepped threaded nozzle combining liquid and air channels for ultra-fine droplets.
⌀9.2–19.6 · L 20–48 mm
9 types
Lubrication Nozzle
Center-bored threaded precision oil delivery nozzle.
⌀8.1–19.6 · L 19–47 mm
10 types
Dosing Tip
Fine-bored stepped conical dosing nozzle for precise fluid metering.
⌀6–19.6 · L 13–36 mm
10 types
Air Blow Tip
Blow tip with converging outlet for high-velocity air jet.
⌀5–19.6 · L 20–50 mm
10 types
Coolant Nozzle
Directed coolant spray nozzle for chip evacuation.
⌀9.2–19.6 · L 21–57 mm
9 types
Fill Nozzle
Large-bore drip-free liquid fill nozzle.
⌀11.5–19.6 · L 28–55 mm
8 types
Mist Nozzle
Fine-orifice conical-tip mist/aerosol generation nozzle.
⌀5–19.6 · L 19–37 mm
9 types
Grease Nozzle
Threaded conical-tip nozzle for high-pressure grease delivery.
⌀11.5–19.6 · L 24–45 mm
8 types
Enter ⌀ and L to list matching variants with code and tolerance.
Search this category by sizeNozzles are precision, rotationally symmetric components that spray, atomize or direct the flow of liquid, air or grease in a controlled way. They serve automotive, agricultural spraying, paint and coating lines, food filling, lubrication and oil systems, and coolant circuits, where performance depends heavily on micron-level accuracy in orifice diameter, cone angle and internal geometry. This category holds 14 families and 132 types in total: Conical Spray Nozzle, Mist Nozzle, Fan Nozzle, Tapered Jet Nozzle, Multi-Hole Nozzle, Hollow-Cone Nozzle, Air-Atomizing Nozzle, Lubrication Nozzle, Dosing Tip, Air Blow Tip, Coolant Nozzle, Fill Nozzle, Mist Nozzle and Grease Nozzle. They are turned from steel, stainless steel, brass and aluminum, typically to h6/H7 diameter tolerances; ±0.01 mm is targeted on critical diameters. Machining is completed in a single setup on a Goodway SW-20 CNC Swiss lathe across a ⌀5–19.6 mm range. Send us your technical drawing or a sample and we will prepare custom manufacturing and a quote based on dimension, material and quantity.
Threading defines this category: 124 of the 132 variants (94%) carry a thread. The full operation mix is 124× thread turning, 112× hex flat milling, 132× axial bore, 88× taper turning, 8× knurling, all of it completed in one setup on parts 13–67 mm long.
Everything here is held to 2 tolerance classes (6g, h7), and 100% of the variants map to a DIN or ISO standard. The highest length-to-diameter ratio in the category belongs to NOZB-AIR-04 at L/D 4 — the slimmest proportion here, still within reach of a conventional lathe.
Every part is CNC-turned to your drawing — series, small batches and custom turned parts. Send your drawing (PDF/DWG/STEP) for a quote.
Frequently Asked Questions
We turn them in a single operation from ⌀5–19.6 mm bar stock on a Goodway SW-20 CNC Swiss lathe. The cone angle, seat face and orifice are machined repeatably thanks to the sliding-headstock lathe's high concentricity; small holes and cross-drillings are added with live tooling and secondary drilling. First-article and in-process dimensions are checked throughout the run.
Steel, stainless steel, brass and aluminum are our standard options. Stainless steel suits corrosive or chemical-spraying environments, brass offers good thermal/electrical conductivity and machinability, and aluminum is chosen for light weight. Tell us your operating environment and we will recommend a material.
Diameter tolerances are typically at the h6/H7 level; ±0.01 mm is targeted on critical diameters. Orifice diameter, cone angle and surface finish are machined and inspected against the values on your technical drawing.
Yes. Beyond the 132 standard types, we produce custom orifice diameters, cone angles, threads and connection geometries from a drawing or sample. Any size up to ⌀20 mm (the SW-20 ceiling) can be evaluated.
We have run contract Swiss-turning in Düzce, Turkey since 2009 and are flexible from small prototype batches to high-volume series. Exact minimum quantity, lead time and price are confirmed at the quote stage based on dimension, material and volume. We serve both domestic and export orders.
Related Categories
Let Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.