Bushing Manufacturing — Plain, Flanged and Bronze Sleeve Bearings
⌀6–20 mm plain, flanged, bronze and PTFE-lined bushing manufacturing. 15 families, 137 types + custom sizes; steel, stainless, brass, aluminum.
Part Families
Plain Sleeve Bushing
Single-diameter plain-wall cylindrical sleeve bearing bushing.
⌀6–20 · L 6–30 mm
10 types
Flanged Sleeve Bushing
Stepped sleeve bushing with an axial thrust flange at one end.
⌀9–20 · L 7.5–31.5 mm
9 types
Stepped Sleeve Bushing
Sleeve bushing bearing on two distinct outer-diameter steps.
⌀10–20 · L 12–26 mm
9 types
Thin-Wall Sleeve Bushing
Thin-walled wrapped-type bushing for lightweight low-clearance bearing.
⌀8–20 · L 6–18 mm
9 types
Bronze Bearing Bushing
Thick-wall bronze plain bearing bushing for high load capacity.
⌀10–20 · L 10–40 mm
9 types
Graphite-Plugged Bushing
Self-lubricating plain bushing with graphite plugs for dry running.
⌀12–20 · L 12–35 mm
8 types
Knurled Press-Fit Bushing
Plain bushing with knurled outer surface for press-fit into soft housings.
⌀8–20 · L 8–20 mm
9 types
Felt Bushing
Bushing with inner seat that positions the oil felt for sealing.
⌀8–20 · L 8–18 mm
9 types
Insulation Bushing
Shouldered bushing that electrically/thermally isolates the bolt from the body.
⌀8–20 · L 8–18 mm
9 types
Reduction Bushing
Stepped bushing that reduces a large bore to a smaller shaft.
⌀8–20 · L 10–25 mm
10 types
Drill Guide Bushing
Hardened guide bushing that precisely directs the drill bit.
⌀6–20 · L 8–25 mm
10 types
Lubricated Bushing
Plain sliding bushing with oil groove and grease nipple seat.
⌀9–20 · L 12–24 mm
9 types
PTFE-Lined Bushing
Machined steel shell seated for a dry-running PTFE liner.
⌀8–20 · L 10–24 mm
10 types
Threaded Insulation Bushing
Feed-through bushing with external thread for panel mounting and insulated bore.
⌀10–20 · L 11–21 mm
9 types
Tapered Clamping Bushing
Slotted bushing whose tapered outer face clamps radially onto a shaft.
⌀10–20 · L 12–24 mm
8 types
Enter ⌀ and L to list matching variants with code and tolerance.
Search this category by sizeBushings are cylindrical bearing elements that reduce friction and wear between two moving parts, center the shaft and carry the load; they are widely used in pumps, gearboxes, hydraulic cylinders, conveyors, textile and automotive machinery. This category holds 15 families and 137 types: plain and flanged sleeve bushings, stepped bushings, thin-wall bushings, bronze sleeve bearings, graphite- and PTFE-lined bushings, knurled press-fit bushings, felt, insulation, reduction, lubricated and taper-clamp bushings. We machine steel, stainless steel, brass and aluminum. Outer diameter and mating surfaces are held to h6/g6, the inner bearing bore to H7; ±0.01 mm is targeted on critical diameters. Every part is CNC-turned on our Goodway SW-20 Swiss-type lathe within the ⌀6–20 mm range. Alongside the 137 catalog types, we also produce custom sizes from a technical drawing or sample. Pricing is quotation-based; share your drawing or dimensions and we will prepare an offer based on size, tolerance, material and quantity.
These are short, stout parts: 6–40 mm long, with no variant exceeding L/D 2. Rigidity is not the constraint here, repeatability is — 137 variants, machined in one setup, requiring 9× thread turning, 2× hex flat milling, 137× axial bore, 9× taper turning, 10× knurling.
Everything here is held to 12 tolerance classes (6g, H7, H7/e7, H7/e8, H7/f7, H8/u8, H9/e8, e7, g6, h6, h7, h8), and 100% of the variants map to a DIN or ISO standard.
Every part is CNC-turned to your drawing — series, small batches and custom turned parts. Send your drawing (PDF/DWG/STEP) for a quote.
Frequently Asked Questions
We manufacture in steel, stainless steel, brass and aluminum. Brass and bronze-based alloys are common for sleeve bearings, stainless steel for corrosive environments, and aluminum where light weight matters. We help you choose the best option based on the application and the mating surface material.
Mating surfaces are held to h6/g6 and the inner bearing bore to H7; ±0.01 mm is targeted on critical diameters. Just state whether you need an interference, transition or clearance fit on the drawing. The Goodway SW-20 Swiss-type lathe holds these tolerances consistently in a single setup.
Yes. Beyond the 137 catalog types, we produce custom bushings within the ⌀6–20 mm range from a technical drawing, an old part or a dimension sketch. Features such as flanges, steps, knurling, oil grooves and bores are machined to your part geometry.
We work from prototype or single parts up to series production and welcome small quantities. Lead time depends on material, tolerance and quantity; we give the exact figure at the quotation stage. Since 2009 we have manufactured at our workshop in Düzce, serving both domestic and export orders.
Send your technical drawing (PDF/DWG), a sample if available, or your diameter-length-bore-tolerance dimensions via WhatsApp or email. Pricing is quotation-based; we prepare your offer according to size, material and quantity.
Related Categories
Let Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.