Skip to content
TRENDE
Get a Quote
142 types · Instant Quote

Textile Machine Parts Manufacturing — CNC Swiss-Lathe Production

Yarn guide pins, bobbin shafts, tension cones, guide bushings and 14 families: 142 textile machine part types. ⌀1–20 mm CNC turning, ±0.01 mm precision, quote by drawing.

Manufacturing Scope

Textile machine parts are the precision turned components that guide, tension and locate the yarn path on weaving, knitting, twisting and dyeing-finishing machinery. This category holds 14 families and 142 part types in total: yarn guide pins, bobbin shafts, tension pins, guide bushings, needle-block pins, guide flanges, tension cones, shuttle pins, cam shafts, drive pins, adjustment bushings, tension pins, guide shafts and eccentric pins. Parts are machined from steel, stainless steel, brass or aluminium; yarn-contact surfaces are finished to a low-friction quality that does not abrade or fray the thread. Production runs on the Goodway SW-20 Swiss lathe across a ⌀1–20 mm diameter range, with typical tolerances in the h6/H7 class and critical dimensions held to around ±0.01 mm. Beyond the 142 catalog types, we manufacture custom sizes and geometries from your technical drawing or sample. Pricing is on request: send your drawing and we will quote by material and quantity.

The defining part here is TEKB-KLZ-10T at L/D 13.8 — the slenderness a sliding-head lathe is built for. Lengths across the 142 variants run 8–150 mm, the longest being TEKB-KLZ-14 at 150 mm, still inside the 207 mm single-setup limit. Operations: 37× thread turning, 14× hex flat milling, 52× axial bore, 12× taper turning, 26× knurling.

97 of the 142 variants reference a DIN or ISO standard; the tolerance classes in use are 6g, H7, h6, h7, h8, m6.

Every part is CNC-turned to your drawing — series, small batches and custom turned parts. Send your drawing (PDF/DWG/STEP) for a quote.

Part Families

Thread Guide PinStepped guide pin with polished cone tip for friction-free thread routing.10 types⌀6–18 mmOpen the code & size table →Bobbin SpindleSlender bobbin spindle with cone tip and knurled grip zone for bobbin centring.10 types⌀4–12 mmOpen the code & size table →Tension PinTension pin with knurled head and internal thread for adjusting yarn tension.10 types⌀8–19.6 mmOpen the code & size table →Guide BushBored guide bush with chamfered ends for bearing thread or spindle.10 types⌀8–20 mmOpen the code & size table →Needle Block PinHardened pin with press-fit tolerance and chamfered tip for locating the needle block.10 types⌀3–10 mmOpen the code & size table →Eyelet GuidePolished eyelet guide with cone-mouthed ends passing the thread through a bore.10 types⌀6–18 mmOpen the code & size table →Tension ConeTapered tension cone with internal thread applying pressure to yarn discs.10 types⌀10–20 mmOpen the code & size table →Shuttle PinHardened wear-resistant pin guiding the shuttle in a weaving loom.10 types⌀4–12 mmOpen the code & size table →Cam ShaftStepped drive shaft with threaded end transmitting motion.11 types⌀5–16 mmOpen the code & size table →Drive PinCone-tipped drive pin for torque transmission.11 types⌀3–12 mmOpen the code & size table →Adjusting BushInternally threaded knurled bush providing position adjustment.10 types⌀10–19.6 mmOpen the code & size table →Tension PinThreaded-body tension pin adjusting yarn tension.10 types⌀4–19.6 mmOpen the code & size table →Guide RodPrecision-ground guide rod steering the moving slide.10 types⌀5–16 mmOpen the code & size table →Eccentric PinStepped eccentric-body motion pin providing fine adjustment.10 types⌀5–19.6 mmOpen the code & size table →

We machine steel, stainless steel, brass and aluminium. Yarn-contact parts such as guide pins, tension cones and guide bushings are usually made in wear- and moisture-resistant stainless steel or low-friction brass, while load-bearing parts like drive pins and cam shafts are made in steel. We choose the material together with you based on the part's function and its working environment.

Related Categories

Pins Bushings Shafts Fasteners Nuts & Adapters Spacers & Standoffs Fittings Nozzles Valve Parts Connector Pins Fixing & Locating Membrane Press Spares Custom Turned Parts Medical & Dental Parts Couplings & Shaft Adapters Bearing & Seal Adapters Electrodes & EDM Tips Opto-Mechanical Parts Automotive Precision Parts Hydraulic & Pneumatic Pistons Mold & Die Components Joint & Pivot Elements Micro & Watch Parts
Let's Start Your Project

Let Us Create a Solution
Tailored to Your Needs

Contact us to discuss your project. Let our technical team determine the most suitable solution.

Request a Quote +90 505 577 02 45
Call usWhatsAppGet a Quote