Ayyıldız Robotics
Technical Data Sheet
- Date:
- Sheet No.:
- elektrot-edm-hex-electrode
Hex-Body Electrode
Die-sinking electrode with hex body for keyed alignment and easy indexing.
- Variants
- 9 types
- Diameter
- 6.4–19.6 mm
- Length
- 24–40 mm
- Material
- Brass
- Tolerance
- h7
Code & Size Table
Code, dimensions and tolerance for all 9 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| ELEB-HEX-03 | 6.4 | 24 | SW5.5 | h7 | M3 orifice 5.5 |
| ELEB-HEX-04 | 8.1 | 28 | SW7 | h7 · ⌀4: 0/−0.012 | M4 orifice 7 |
| ELEB-HEX-05 | 9.2 | 30 | SW8 | h7 · ⌀5: 0/−0.012 | M5 orifice 8 |
| ELEB-HEX-05C | 9.2 | 31 | SW8 · taper | h7 | orifice 8, cone point |
| ELEB-HEX-06 | 11.5 | 32 | SW10 | h7 · ⌀6: 0/−0.012 | M6 orifice 10 |
| ELEB-HEX-06C | 11.5 | 34 | SW10 · taper | h7 | orifice 10, cone point |
| ELEB-HEX-08 | 15 | 36 | SW13 | h7 · ⌀8: 0/−0.015 | M8 orifice 13 |
| ELEB-HEX-08C | 15 | 38 | SW13 · taper | h7 | orifice 13, cone point |
| ELEB-HEX-10 | 19.6 | 40 | SW17 | h7 · ⌀10: 0/−0.015 | M10 orifice 17 |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
- Steel
- Stainless Steel
- Brass (standard)
- Aluminium
General Notes
- This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
- This data sheet carries no prices; contact us with the part code for pricing and a quote.
The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/
Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com