Cannulated Guide Pin

Cannulated guide pin with axial bore for guidewire passage and partially threaded tapered tip.

Variants: 10 types
Diameter: 2.5–9 mm
Length: 76–180 mm
Material: Stainless Steel
Tolerance: h6

Dimension SchematicMEDA-CGP-50 — representative variant of this family

Code & Size Table

Code, dimensions and tolerance for all 10 variants.

Code	Diameter (mm)	Length (mm)	Feature	Tolerance	Std
MEDA-CGP-25	2.5	76	M2.5 · taper · ⌀1.1	h6	axial cannula
MEDA-CGP-30	3	85	M3 · taper · ⌀1.1	h6	axial cannula
MEDA-CGP-35	3.5	93	M3.5 · taper · ⌀1.4	h6 · ⌀3.5: 0/−0.008	axial cannula
MEDA-CGP-40	4	101	M4 · taper · ⌀1.4	h6 · ⌀4: 0/−0.008	axial cannula
MEDA-CGP-45	4.5	109	M4.5 · taper · ⌀2	h6 · ⌀4.5: 0/−0.008	axial cannula
MEDA-CGP-50	5	117	M5 · taper · ⌀2	h6 · ⌀5: 0/−0.008	axial cannula
MEDA-CGP-60	6	133	M6 · taper · ⌀2.5	h6 · ⌀6: 0/−0.008	axial cannula
MEDA-CGP-70	7	149	M7 · taper · ⌀3.2	h6 · ⌀7: 0/−0.009	axial cannula
MEDA-CGP-80	8	165	M8 · taper · ⌀3.2	h6 · ⌀8: 0/−0.009	axial cannula
MEDA-CGP-90	9	180	M9 · taper · ⌀4	h6 · ⌀9: 0/−0.009	axial cannula

Material & Tolerance

The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.

Steel
Stainless Steel (standard)
Brass
Aluminium

General Notes

This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
This data sheet carries no prices; contact us with the part code for pricing and a quote.

The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/en/arac/sw20-parca-katalogu/medikal/medikal-cannulated-guide-pin#MEDA-CGP-50

Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com