Ayyıldız Robotics
Technical Data Sheet
- Date:
- Sheet No.:
- membran-hex-guide-bolt
Hex Guide Bolt
Plate guide pin with a hex wrench flat head and threaded fixing tail.
- Variants
- 10 types
- Diameter
- 6.4–19.6 mm
- Length
- 26–63 mm
- Material
- Stainless Steel
- Tolerance
- 6g
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| MEMA-AKP-03 | 6.4 | 26 | M3 · SW5.5 | 6g | AF5.5 spanner flats |
| MEMA-AKP-04 | 8.1 | 33 | M4 · SW7 | 6g | AF7 spanner flats |
| MEMA-AKP-05 | 9.2 | 40 | M5 · SW8 | 6g | AF8 spanner flats |
| MEMA-AKP-05K | 9.2 | 43 | M5 · SW8 · taper | 6g | AF8 + tapered pilot |
| MEMA-AKP-06 | 11.5 | 47 | M6 · SW10 | 6g | AF10 spanner flats |
| MEMA-AKP-06K | 11.5 | 51 | M6 · SW10 · taper | 6g | AF10 + tapered pilot |
| MEMA-AKP-06D | 11.5 | 47 | M6 · SW10 · ⌀3 | 6g | AF10, internal bore ⌀3 |
| MEMA-AKP-08 | 15 | 54 | M8 · SW13 | 6g | AF13 spanner flats |
| MEMA-AKP-08D | 15 | 54 | M8 · SW13 · ⌀4 | 6g | AF13, internal bore ⌀4 |
| MEMA-AKP-10 | 19.6 | 63 | M10 · SW17 | 6g | AF17 spanner flats |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
- Steel
- Stainless Steel (standard)
- Brass
- Aluminium
General Notes
- This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
- This data sheet carries no prices; contact us with the part code for pricing and a quote.
The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/
Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com