Ayyıldız Robotics
Technical Data Sheet
- Date:
- Sheet No.:
- mil-milb-knurled-shaft
Knurled Shaft
Functional shaft with a knurled zone on the body for grip or press-in retention.
- Variants
- 10 types
- Diameter
- 5–16 mm
- Length
- 27–75 mm
- Material
- Stainless Steel
- Tolerance
- h9 · 6g
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| MILB-KNS-01 | 5 | 27 | knurl · 2 steps | h9 · ⌀5: 0/−0.030 | — |
| MILB-KNS-02 | 6 | 33 | knurl · 2 steps | h9 · ⌀6: 0/−0.030 | — |
| MILB-KNS-03 | 8 | 38 | knurl · 2 steps | h9 · ⌀8: 0/−0.036 | — |
| MILB-KNS-04 | 8 | 52 | M6 · knurl | 6g | knurled + threaded |
| MILB-KNS-05 | 10 | 42 | knurl · 2 steps | h9 · ⌀10: 0/−0.036 | — |
| MILB-KNS-06 | 10 | 50 | knurl · 2 steps | h9 · ⌀10: 0/−0.036 | — |
| MILB-KNS-07 | 12 | 47 | knurl · 2 steps | h9 · ⌀12: 0/−0.043 | — |
| MILB-KNS-08 | 12 | 75 | knurl · 3 steps | h9 · ⌀12: 0/−0.043 | two knurl zones |
| MILB-KNS-09 | 14 | 53 | knurl · 2 steps | h9 · ⌀14: 0/−0.043 | — |
| MILB-KNS-10 | 16 | 58 | knurl · 2 steps | h9 · ⌀16: 0/−0.043 | — |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
- Steel
- Stainless Steel (standard)
- Brass
- Aluminium
General Notes
- This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
- This data sheet carries no prices; contact us with the part code for pricing and a quote.
The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/
Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com