Ayyıldız Robotics
Technical Data Sheet
- Date:
- Sheet No.:
- mil-milb-tapered-shaft
Tapered-End Shaft
Functional shaft tapering to a cone at one end for centering and press-fit seating.
- Variants
- 10 types
- Diameter
- 5–16 mm
- Length
- 30–81 mm
- Material
- Steel
- Tolerance
- h8
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| MILB-TPS-01 | 5 | 30 | taper | h8 · ⌀5: 0/−0.018 | — |
| MILB-TPS-02 | 6 | 37 | taper | h8 · ⌀6: 0/−0.018 | — |
| MILB-TPS-03 | 8 | 45 | taper | h8 · ⌀8: 0/−0.022 | — |
| MILB-TPS-04 | 8 | 45 | taper | h8 · ⌀8: 0/−0.022 | reverse cone point |
| MILB-TPS-05 | 10 | 53 | taper | h8 · ⌀10: 0/−0.022 | — |
| MILB-TPS-06 | 10 | 60 | taper | h8 · ⌀10: 0/−0.022 | — |
| MILB-TPS-07 | 12 | 76 | taper | h8 · ⌀12: 0/−0.027 | double cone point |
| MILB-TPS-08 | 12 | 67 | taper | h8 · ⌀12: 0/−0.027 | — |
| MILB-TPS-09 | 14 | 74 | taper | h8 · ⌀14: 0/−0.027 | — |
| MILB-TPS-10 | 16 | 81 | taper | h8 · ⌀16: 0/−0.027 | — |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
- Steel (standard)
- Stainless Steel
- Brass
- Aluminium
General Notes
- This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
- This data sheet carries no prices; contact us with the part code for pricing and a quote.
The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/
Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com