Tapered-End Shaft
Functional shaft tapering to a cone at one end for centering and press-fit seating.
Manufacturing Scope
Tapered-End Shaft is a Shafts family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀5–16 mm, lengths 30–81 mm, standard material Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀16 mm bar stock; its longest variant is MILB-TPS-10 at 81 mm. Besides turning, the family requires taper turning. All of it is completed in a single setup, without the part leaving the machine.
The most slender variant is MILB-TPS-07: 76 mm long at ⌀12 mm, a length-to-diameter ratio of 6.3. A part this slender needs tailstock support on a conventional lathe. On a sliding-head lathe the guide bushing holds the bar right next to the cutting edge, so the part is machined without a centre.
Variants are machined to h8 tolerance; the smallest is MILB-TPS-01 (⌀5 mm) and the largest MILB-TPS-10 (⌀16 mm). The family includes tapered, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| MILB-TPS-01 | ⌀5 | 30 mm | taper | h8 | — | 26.57 ₺ |
| MILB-TPS-02 | ⌀6 | 37 mm | taper | h8 | — | 28.70 ₺ |
| MILB-TPS-03 | ⌀8 | 45 mm | taper | h8 | — | 31.85 ₺ |
| MILB-TPS-04 | ⌀8 | 45 mm | taper | h8 | reverse cone point | 31.85 ₺ |
| MILB-TPS-05 | ⌀10 | 53 mm | taper | h8 | — | 35.46 ₺ |
| MILB-TPS-06 | ⌀10 | 60 mm | taper | h8 | — | 37.38 ₺ |
| MILB-TPS-07 | ⌀12 | 76 mm | taper | h8 | double cone point | 52.31 ₺ |
| MILB-TPS-08 | ⌀12 | 67 mm | taper | h8 | — | 46.12 ₺ |
| MILB-TPS-09 | ⌀14 | 74 mm | taper | h8 | — | 51.23 ₺ |
| MILB-TPS-10 | ⌀16 | 81 mm | taper | h8 | — | 57.07 ₺ |
Steel · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.