Mounting Pin

Precision dowel pin with cone tip locating optical elements.

Variants: 12 types
Diameter: 2–12 mm
Length: 10–35 mm
Material: Steel
Tolerance: m6 · 6g

Dimension SchematicOPTB-MPN-07 — representative variant of this family

Code & Size Table

Code, dimensions and tolerance for all 12 variants.

Code	Diameter (mm)	Length (mm)	Feature	Tolerance	Std
OPTB-MPN-01	2	10	—	m6	DIN 6325
OPTB-MPN-02	3	12	—	m6	DIN 6325
OPTB-MPN-03	4	16	—	m6 · ⌀4: +0.012/+0.004	DIN 6325
OPTB-MPN-04	5	20	2 steps	m6 · ⌀5: +0.012/+0.004	stepped location pin
OPTB-MPN-05	5	20	—	m6 · ⌀5: +0.012/+0.004	DIN 6325
OPTB-MPN-06	6	24	—	m6 · ⌀6: +0.012/+0.004	DIN 6325
OPTB-MPN-07	6	20	M4	6g	mounting pin with puller thread
OPTB-MPN-08	8	28	—	m6 · ⌀8: +0.015/+0.006	DIN 6325
OPTB-MPN-09	8	22	taper	m6 · ⌀8: +0.015/+0.006	tapered location pin
OPTB-MPN-10	10	30	—	m6 · ⌀10: +0.015/+0.006	DIN 6325
OPTB-MPN-11	10	28	M6	6g	puller thread, shouldered
OPTB-MPN-12	12	35	—	m6 · ⌀12: +0.018/+0.007	DIN 6325

Material & Tolerance

The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.

Steel (standard)
Stainless Steel
Brass
Aluminium

General Notes

This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
This data sheet carries no prices; contact us with the part code for pricing and a quote.

The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/en/arac/sw20-parca-katalogu/optik/optik-opt-mounting-pin#OPTB-MPN-07

Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com