Ayyıldız Robotics
Technical Data Sheet
- Date:
- Sheet No.:
- pim-hex-centering-pin
Hex Centering Pin
Threaded centering pin with a wrench-flat hex body and cone tip for wrench-set location.
- Variants
- 10 types
- Diameter
- 6.4–19.6 mm
- Length
- 18–54 mm
- Material
- Stainless Steel
- Tolerance
- h8
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| PIMA-HCP-03 | 6.4 | 18 | SW5.5 · ⌀2.5 | h8 | M3 thread |
| PIMA-HCP-04 | 8.1 | 23 | SW7 | h8 · ⌀4: 0/−0.018 | — |
| PIMA-HCP-04T | 8.1 | 31 | M4 · SW7 | h8 · ⌀4: 0/−0.018 | threaded body |
| PIMA-HCP-05 | 9.2 | 28 | SW8 | h8 · ⌀5: 0/−0.018 | — |
| PIMA-HCP-05T | 9.2 | 38 | M5 · SW8 | h8 · ⌀5: 0/−0.018 | threaded body |
| PIMA-HCP-06 | 11.5 | 34 | SW10 | h8 · ⌀6: 0/−0.018 | — |
| PIMA-HCP-06T | 11.5 | 46 | M6 · SW10 | h8 · ⌀6: 0/−0.018 | threaded body |
| PIMA-HCP-08 | 15 | 42 | SW13 | h8 · ⌀8: 0/−0.022 | — |
| PIMA-HCP-08T | 15 | 54 | M8 · SW13 | h8 · ⌀8: 0/−0.022 | threaded body |
| PIMA-HCP-10 | 19.6 | 52 | SW17 | h8 · ⌀10: 0/−0.022 | — |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
- Steel
- Stainless Steel (standard)
- Brass
- Aluminium
General Notes
- This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
- This data sheet carries no prices; contact us with the part code for pricing and a quote.
The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/
Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com