Eccentric Pin

Stepped eccentric-body motion pin providing fine adjustment.

Variants: 10 types
Diameter: 5–19.6 mm
Length: 26–54 mm
Material: Steel
Tolerance: h7 · 6g

Dimension SchematicTEKB-EKS-06H — representative variant of this family

Code & Size Table

Code, dimensions and tolerance for all 10 variants.

Code	Diameter (mm)	Length (mm)	Feature	Tolerance	Std
TEKB-EKS-05	5	28	2 steps	h7 · ⌀5: 0/−0.012	eccentric offset 1 mm
TEKB-EKS-06	6	32	2 steps	h7 · ⌀6: 0/−0.012	eccentric offset 1.5 mm
TEKB-EKS-08	8	36	2 steps	h7 · ⌀8: 0/−0.015	eccentric offset 2 mm
TEKB-EKS-08T	8	44	M6	6g	threaded locking end, offset 2 mm
TEKB-EKS-10	10	40	2 steps	h7 · ⌀10: 0/−0.015	eccentric offset 2.5 mm
TEKB-EKS-06H	11.5	26	SW10	h7 · ⌀6: 0/−0.012	hex adjusting head, offset 1.5 mm
TEKB-EKS-12	12	48	2 steps	h7 · ⌀12: 0/−0.018	eccentric offset 3 mm
TEKB-EKS-12T	12	54	M10	6g	threaded locking end, offset 3 mm
TEKB-EKS-08H	15	29	SW13	h7 · ⌀8: 0/−0.015	hex adjusting head, offset 2 mm
TEKB-EKS-10H	19.6	32	SW17	h7 · ⌀10: 0/−0.015	hex adjusting head, offset 2.5 mm

Material & Tolerance

The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.

Steel (standard)
Stainless Steel
Brass
Aluminium

General Notes

This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
This data sheet carries no prices; contact us with the part code for pricing and a quote.

The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/en/arac/sw20-parca-katalogu/tekstil/tekstil-eksantrik-pim#TEKB-EKS-06H

Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com