Ayyıldız Robotics
Technical Data Sheet
- Date:
- Sheet No.:
- tekstil-needle-block-pin
Needle Block Pin
Hardened pin with press-fit tolerance and chamfered tip for locating the needle block.
- Variants
- 10 types
- Diameter
- 3–10 mm
- Length
- 14–36 mm
- Material
- Steel
- Tolerance
- m6 · 6g
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| TEKA-NBP-03 | 3 | 14 | — | m6 | hardened 58 HRC |
| TEKA-NBP-04 | 4 | 18 | — | m6 · ⌀4: +0.012/+0.004 | hardened 58 HRC |
| TEKA-NBP-05 | 5 | 22 | — | m6 · ⌀5: +0.012/+0.004 | hardened 58 HRC |
| TEKA-NBP-04S | 6 | 21 | 2 steps | m6 · ⌀6: +0.012/+0.004 | shouldered location |
| TEKA-NBP-06 | 6 | 26 | — | m6 · ⌀6: +0.012/+0.004 | hardened 58 HRC |
| TEKA-NBP-06T | 6 | 26 | M6 | 6g | M6 puller thread |
| TEKA-NBP-05S | 7 | 26 | 2 steps | m6 | shouldered location |
| TEKA-NBP-08 | 8 | 30 | — | m6 · ⌀8: +0.015/+0.006 | hardened 58 HRC |
| TEKA-NBP-08T | 8 | 32 | M8 | 6g | M8 puller thread |
| TEKA-NBP-10 | 10 | 36 | — | m6 · ⌀10: +0.015/+0.006 | hardened 58 HRC |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
- Steel (standard)
- Stainless Steel
- Brass
- Aluminium
General Notes
- This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
- This data sheet carries no prices; contact us with the part code for pricing and a quote.
The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/
Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com