Skip to content
Back to family page

Ayyıldız Robotics

Technical Data Sheet

Date:
Sheet No.:
tespit-dowel-pin-tapped
Fixing & Locating

Internally Tapped Extraction Dowel

Parallel dowel pin with an internal thread at one end for removal via an extraction bolt.

Variants
10 types
Diameter
4–20 mm
Length
20–80 mm
Material
Steel
Tolerance
m6
Dimension SchematicTESA-DPT-12 — representative variant of this family
Ayyildiz RoboticsDimension Schematic⌀12 m6⌀1250⌀12Dimensions in mmCODETESA-DPT-12MATERIALSteelSIZE⌀12 × 50 · ⌀5TOLERANCEm6internal thread M6 – ISO 8733

Code & Size Table

Code, dimensions and tolerance for all 10 variants.

CodeDiameter (mm)Length (mm)FeatureToleranceStd
TESA-DPT-04420⌀2.1m6 · ⌀4: +0.012/+0.004internal thread M2.5 – ISO 8733
TESA-DPT-05524⌀2.5m6 · ⌀5: +0.012/+0.004internal thread M3 – ISO 8733
TESA-DPT-06630⌀3.3m6 · ⌀6: +0.012/+0.004internal thread M4 – ISO 8733
TESA-DPT-08836⌀4.2m6 · ⌀8: +0.015/+0.006internal thread M5 – ISO 8733
TESA-DPT-101045⌀5m6 · ⌀10: +0.015/+0.006internal thread M6 – ISO 8733
TESA-DPT-121250⌀5m6 · ⌀12: +0.018/+0.007internal thread M6 – ISO 8733
TESA-DPT-141455⌀6.8m6 · ⌀14: +0.018/+0.007internal thread M8 – ISO 8733
TESA-DPT-161660⌀6.8m6 · ⌀16: +0.018/+0.007internal thread M8 – ISO 8733
TESA-DPT-181870⌀8.5m6 · ⌀18: +0.018/+0.007internal thread M10 – ISO 8733
TESA-DPT-202080⌀8.5m6 · ⌀20: +0.021/+0.008internal thread M10 – ISO 8733

Material & Tolerance

The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.

  • Steel (standard)
  • Stainless Steel
  • Brass
  • Aluminium

General Notes

  • This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
  • This data sheet carries no prices; contact us with the part code for pricing and a quote.

The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/en/arac/sw20-parca-katalogu/tespit/tespit-dowel-pin-tapped#TESA-DPT-12

Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com

Call usWhatsAppGet a Quote