Knurled Press-Fit Guide Pin

Guide pin with a knurled retention section for press-fit into a bore and a chamfered lead-in tip.

Variants: 10 types
Diameter: 3–20 mm
Length: 16–80 mm
Material: Steel
Tolerance: h7

Dimension SchematicTESA-KGP-10 — representative variant of this family

Code & Size Table

Code, dimensions and tolerance for all 10 variants.

Code	Diameter (mm)	Length (mm)	Feature	Tolerance	Std
TESA-KGP-03	3	16	knurl · 2 steps	h7	knurled press fit
TESA-KGP-04	4	20	knurl · 2 steps	h7 · ⌀4: 0/−0.012	knurled press fit
TESA-KGP-05	5	25	knurl · 2 steps	h7 · ⌀5: 0/−0.012	knurled press fit
TESA-KGP-06	6	30	knurl · 2 steps	h7 · ⌀6: 0/−0.012	knurled press fit
TESA-KGP-08	8	38	knurl · 2 steps	h7 · ⌀8: 0/−0.015	knurled press fit
TESA-KGP-10	10	46	knurl · 2 steps	h7 · ⌀10: 0/−0.015	knurled press fit
TESA-KGP-12	12	52	knurl · 2 steps	h7 · ⌀12: 0/−0.018	knurled press fit
TESA-KGP-14	14	60	knurl · 2 steps	h7 · ⌀14: 0/−0.018	knurled press fit
TESA-KGP-16	16	68	knurl · 2 steps	h7 · ⌀16: 0/−0.018	knurled press fit
TESA-KGP-20	20	80	knurl · 2 steps	h7 · ⌀20: 0/−0.021	knurled press fit

Material & Tolerance

The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.

Steel (standard)
Stainless Steel
Brass
Aluminium

General Notes

This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
This data sheet carries no prices; contact us with the part code for pricing and a quote.

The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/en/arac/sw20-parca-katalogu/tespit/tespit-knurled-press-fit-guide-pin#TESA-KGP-10

Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com