Knurled Press-Fit Guide Pin
Guide pin with a knurled retention section for press-fit into a bore and a chamfered lead-in tip.
Manufacturing Scope
Knurled Press-Fit Guide Pin is a Fixing & Locating family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀3–20 mm, lengths 16–80 mm, standard material Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
Variants are machined to h7 tolerance; the smallest is TESA-KGP-03 (⌀3 mm) and the largest TESA-KGP-20 (⌀20 mm). The family includes knurled, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| TESA-KGP-03 | ⌀3 | 16 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
| TESA-KGP-04 | ⌀4 | 20 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
| TESA-KGP-05 | ⌀5 | 25 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
| TESA-KGP-06 | ⌀6 | 30 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
| TESA-KGP-08 | ⌀8 | 38 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
| TESA-KGP-10 | ⌀10 | 46 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
| TESA-KGP-12 | ⌀12 | 52 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
| TESA-KGP-14 | ⌀14 | 60 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
| TESA-KGP-16 | ⌀16 | 68 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
| TESA-KGP-20 | ⌀20 | 80 mm | knurl · 2 steps | h7 | Tırtıllı sıkı geçme |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categoryLet Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.