Ayyıldız Robotics
Technical Data Sheet
- Date:
- Sheet No.:
- medikal-k-wire-driver
K-Wire Driver Pin
Kirschner-wire driver pin with knurled grip band and sharp trocar point.
- Variants
- 10 types
- Diameter
- 1–4 mm
- Length
- 54–119 mm
- Material
- Stainless Steel
- Tolerance
- h7
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| MEDA-KWD-10 | 1 | 54 | taper · knurl | h7 | knurled grip |
| MEDA-KWD-12 | 1.2 | 61 | taper · knurl | h7 | knurled grip |
| MEDA-KWD-14 | 1.4 | 67 | taper · knurl | h7 | knurled grip |
| MEDA-KWD-16 | 1.6 | 74 | taper · knurl | h7 | knurled grip |
| MEDA-KWD-18 | 1.8 | 80 | taper · knurl | h7 | knurled grip |
| MEDA-KWD-20 | 2 | 87 | taper · knurl | h7 | knurled grip |
| MEDA-KWD-25 | 2.5 | 95 | taper · knurl | h7 | knurled grip |
| MEDA-KWD-30 | 3 | 103 | taper · knurl | h7 | knurled grip |
| MEDA-KWD-35 | 3.5 | 111 | taper · knurl | h7 · ⌀3.5: 0/−0.012 | knurled grip |
| MEDA-KWD-40 | 4 | 119 | taper · knurl | h7 · ⌀4: 0/−0.012 | knurled grip |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
- Steel
- Stainless Steel (standard)
- Brass
- Aluminium
General Notes
- This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
- This data sheet carries no prices; contact us with the part code for pricing and a quote.
The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/
Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com