Ayyıldız Robotics
Technical Data Sheet
- Date:
- Sheet No.:
- membran-guide-pin
Guide Pin
Guide pin with conical lead-in tip and flat shoulder for plate alignment.
- Variants
- 10 types
- Diameter
- 6–20 mm
- Length
- 23–75 mm
- Material
- Steel
- Tolerance
- h7
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| MEMA-KLP-03 | 6 | 23 | taper | h7 | 30°° lead-in cone |
| MEMA-KLP-04 | 7 | 29 | taper | h7 | 30°° lead-in cone |
| MEMA-KLP-05 | 8 | 36 | taper | h7 | 30°° lead-in cone |
| MEMA-KLP-05C | 8 | 31 | 2 steps | h7 | chamfered end |
| MEMA-KLP-06 | 10 | 43 | taper | h7 | 30°° lead-in cone |
| MEMA-KLP-06C | 10 | 37 | 2 steps | h7 | chamfered end |
| MEMA-KLP-08 | 12 | 51 | taper | h7 | 30°° lead-in cone |
| MEMA-KLP-10 | 15 | 59 | taper | h7 | 30°° lead-in cone |
| MEMA-KLP-12 | 18 | 67 | taper | h7 · ⌀18: 0/−0.018 | 30°° lead-in cone |
| MEMA-KLP-14 | 20 | 75 | taper | h7 | 30°° lead-in cone |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
- Steel (standard)
- Stainless Steel
- Brass
- Aluminium
General Notes
- This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
- This data sheet carries no prices; contact us with the part code for pricing and a quote.
The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/
Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com