Guide Pin
Guide pin with conical lead-in tip and flat shoulder for plate alignment.
Manufacturing Scope
Guide Pin is a Membrane Press Spares family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀6–20 mm, lengths 23–75 mm, standard material Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is MEMA-KLP-14 at 75 mm. Besides turning, the family requires taper turning. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is MEMA-KLP-05: 36 mm long at ⌀8 mm, L/D 4.5. This ratio is achievable on a conventional lathe as well; the sliding-head advantage in series work is that the part never leaves the machine, so the size does not drift from variant to variant.
Variants are machined to h7 tolerance; the smallest is MEMA-KLP-03 (⌀6 mm) and the largest MEMA-KLP-14 (⌀20 mm). The family includes tapered, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| MEMA-KLP-03 | ⌀6 | 23 mm | taper | h7 | 30°° lead-in cone | 37.15 ₺ |
| MEMA-KLP-04 | ⌀7 | 29 mm | taper | h7 | 30°° lead-in cone | 42.02 ₺ |
| MEMA-KLP-05 | ⌀8 | 36 mm | taper | h7 | 30°° lead-in cone | 47.54 ₺ |
| MEMA-KLP-05C | ⌀8 | 31 mm | 2 steps | h7 | chamfered end | 43.14 ₺ |
| MEMA-KLP-06 | ⌀10 | 43 mm | taper | h7 | 30°° lead-in cone | 55.11 ₺ |
| MEMA-KLP-06C | ⌀10 | 37 mm | 2 steps | h7 | chamfered end | 48.60 ₺ |
| MEMA-KLP-08 | ⌀12 | 51 mm | taper | h7 | 30°° lead-in cone | 62.90 ₺ |
| MEMA-KLP-10 | ⌀15 | 59 mm | taper | h7 | 30°° lead-in cone | 72.23 ₺ |
| MEMA-KLP-12 | ⌀18 | 67 mm | taper | h7 | 30°° lead-in cone | 94.92 ₺ |
| MEMA-KLP-14 | ⌀20 | 75 mm | taper | h7 | 30°° lead-in cone | 106.72 ₺ |
Steel · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.