Ayyıldız Robotics
Technical Data Sheet
- Date:
- Sheet No.:
- membran-spring-pin-body
Spring Pin Body
Spring-loaded pin body bored for an internal compression spring seat.
- Variants
- 10 types
- Diameter
- 8–20 mm
- Length
- 24–61 mm
- Material
- Stainless Steel
- Tolerance
- h7
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| MEMA-YPG-04 | 8 | 24 | ⌀2.5 · 2 steps | h7 | spring pocket ⌀2.5 |
| MEMA-YPG-05 | 9 | 28 | ⌀3 · 2 steps | h7 | spring pocket ⌀3 |
| MEMA-YPG-05L | 9 | 46 | ⌀3 · 2 steps | h7 | long body, spring pocket ⌀3 |
| MEMA-YPG-06 | 11 | 33 | ⌀3.5 · 2 steps | h7 | spring pocket ⌀3.5 |
| MEMA-YPG-06D | 11 | 36 | taper · ⌀3.5 | h7 | cone point + spring pocket ⌀3.5 |
| MEMA-YPG-08 | 13 | 40 | ⌀5 · 2 steps | h7 | spring pocket ⌀5 |
| MEMA-YPG-08D | 13 | 44 | taper · ⌀5 | h7 | cone point + spring pocket ⌀5 |
| MEMA-YPG-10 | 16 | 47 | ⌀6.5 · 2 steps | h7 | spring pocket ⌀6.5 |
| MEMA-YPG-12 | 18 | 54 | ⌀8 · 2 steps | h7 · ⌀18: 0/−0.018 | spring pocket ⌀8 |
| MEMA-YPG-14 | 20 | 61 | ⌀9 · 2 steps | h7 | spring pocket ⌀9 |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
- Steel
- Stainless Steel (standard)
- Brass
- Aluminium
General Notes
- This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
- This data sheet carries no prices; contact us with the part code for pricing and a quote.
The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/
Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com