Adjusting Collar

Adjusting collar fixed to the shaft via a set screw in a radial threaded hole.

Variants: 10 types
Diameter: 12–20 mm
Length: 8–20 mm
Material: Steel
Tolerance: h9

Dimension SchematicRULA-AYR-10L — representative variant of this family

Code & Size Table

Code, dimensions and tolerance for all 10 variants.

Code	Diameter (mm)	Length (mm)	Feature	Tolerance	Std
RULA-AYR-05	12	8	⌀5	h9 · ⌀12: 0/−0.043	bore ⌀5 + M4 radial set screw
RULA-AYR-06	14	9	⌀6	h9 · ⌀14: 0/−0.043	bore ⌀6 + M4 radial set screw
RULA-AYR-08	15	10	⌀8	h9 · ⌀15: 0/−0.043	bore ⌀8 + M5 radial set screw
RULA-AYR-08L	15	16	⌀8	h9 · ⌀15: 0/−0.043	bore ⌀8, long + 2× M5 set screw
RULA-AYR-10	16	11	⌀10	h9 · ⌀16: 0/−0.043	bore ⌀10 + M5 radial set screw
RULA-AYR-10L	16	18	⌀10	h9 · ⌀16: 0/−0.043	bore ⌀10, long + 2× M5 set screw
RULA-AYR-12	18	12	⌀12	h9 · ⌀18: 0/−0.043	bore ⌀12 + M6 radial set screw
RULA-AYR-12L	18	20	⌀12	h9 · ⌀18: 0/−0.043	bore ⌀12, long + 2× M6 set screw
RULA-AYR-14	20	13	⌀14	h9 · ⌀20: 0/−0.052	bore ⌀14 + M6 radial set screw
RULA-AYR-15	20	14	⌀15	h9 · ⌀20: 0/−0.052	bore ⌀15 + M6 radial set screw

Material & Tolerance

The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.

Steel (standard)
Stainless Steel
Brass
Aluminium

General Notes

This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
This data sheet carries no prices; contact us with the part code for pricing and a quote.

The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/en/arac/sw20-parca-katalogu/rulman/rulman-rula-ayar-bilezik#RULA-AYR-10L

Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com