Adjusting Collar
Adjusting collar fixed to the shaft via a set screw in a radial threaded hole.
Manufacturing Scope
Adjusting Collar is a Bearing & Seal Adapters family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀12–20 mm, lengths 8–20 mm, standard material Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is RULA-AYR-12L at 20 mm. The family is produced by turning alone. Bores in this family run ⌀5–15 mm. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is RULA-AYR-10L: 18 mm long at ⌀16 mm, L/D 1.1. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to h9 tolerance; the smallest is RULA-AYR-05 (⌀12 mm) and the largest RULA-AYR-15 (⌀20 mm). The family includes bored variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| RULA-AYR-05 | ⌀12 | 8 mm | ⌀5 | h9 | bore Ø5 + M4 radial set screw | 26.43 ₺ |
| RULA-AYR-06 | ⌀14 | 9 mm | ⌀6 | h9 | bore Ø6 + M4 radial set screw | 27.86 ₺ |
| RULA-AYR-08 | ⌀15 | 10 mm | ⌀8 | h9 | bore Ø8 + M5 radial set screw | 28.88 ₺ |
| RULA-AYR-08L | ⌀15 | 16 mm | ⌀8 | h9 | bore Ø8, long + 2× M5 set screw | 32.56 ₺ |
| RULA-AYR-10 | ⌀16 | 11 mm | ⌀10 | h9 | bore Ø10 + M5 radial set screw | 29.91 ₺ |
| RULA-AYR-10L | ⌀16 | 18 mm | ⌀10 | h9 | bore Ø10, long + 2× M5 set screw | 34.28 ₺ |
| RULA-AYR-12 | ⌀18 | 12 mm | ⌀12 | h9 | bore Ø12 + M6 radial set screw | 31.50 ₺ |
| RULA-AYR-12L | ⌀18 | 20 mm | ⌀12 | h9 | bore Ø12, long + 2× M6 set screw | 36.72 ₺ |
| RULA-AYR-14 | ⌀20 | 13 mm | ⌀14 | h9 | bore Ø14 + M6 radial set screw | 33.20 ₺ |
| RULA-AYR-15 | ⌀20 | 14 mm | ⌀15 | h9 | bore Ø15 + M6 radial set screw | 33.80 ₺ |
Steel · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.