Hex-Drive Centering Pin

Centering pin with a wrench-driven hex grip section and a chamfered locating body.

Variants: 10 types
Diameter: 8.1–19.6 mm
Length: 20–62 mm
Material: Brass
Tolerance: h8

Dimension SchematicTESA-HXP-10 — representative variant of this family

Code & Size Table

Code, dimensions and tolerance for all 10 variants.

Code	Diameter (mm)	Length (mm)	Feature	Tolerance	Std
TESA-HXP-04	8.1	20	SW7	h8 · ⌀4: 0/−0.018	AF7 hex flats
TESA-HXP-05	9.2	23	SW8	h8 · ⌀5: 0/−0.018	AF8 hex flats
TESA-HXP-06	11.5	28	SW10	h8 · ⌀6: 0/−0.018	AF10 hex flats
TESA-HXP-07	11.5	31	SW10	h8 · ⌀7: 0/−0.022	AF10 hex flats
TESA-HXP-08	15	36	SW13	h8 · ⌀8: 0/−0.022	AF13 hex flats
TESA-HXP-10	15	41	SW13	h8 · ⌀10: 0/−0.022	AF13 hex flats
TESA-HXP-11	19.6	44	SW17	h8 · ⌀11: 0/−0.027	SW17 hex flats
TESA-HXP-12	19.6	46	SW17	h8 · ⌀12: 0/−0.027	SW17 hex flats
TESA-HXP-14	19.6	54	SW17	h8 · ⌀14: 0/−0.027	SW17 hex flats
TESA-HXP-16	19.6	62	SW17	h8 · ⌀16: 0/−0.027	SW17 hex flats

Material & Tolerance

The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.

Steel
Stainless Steel
Brass (standard)
Aluminium

General Notes

This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
This data sheet carries no prices; contact us with the part code for pricing and a quote.

The CAD model (STEP) and 2D drawing (DXF) are downloaded from the family page: ayyildizrobotics.com/en/arac/sw20-parca-katalogu/tespit/tespit-diamond-hex-locating-pin#TESA-HXP-10

Contact: Phone +90 505 577 02 45 · E-mail info@ayyildizrobotics.com · Web ayyildizrobotics.com