ABS Pin
Stepped hardened locating pin for ABS wheel-speed sensor.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| OTOB-ABP-05 | 4 | 15 | 2 steps | h6 | stepped ABS pin |
| OTOB-ABP-06 | 5 | 18 | 2 steps | h6 · ⌀5: 0/−0.008 | stepped ABS pin |
| OTOB-ABP-07 | 6 | 20 | 2 steps | h6 · ⌀6: 0/−0.008 | stepped ABS pin |
| OTOB-ABP-08 | 6 | 25 | knurl · 3 steps | h6 · ⌀6: 0/−0.008 | knurled-head ABS pin |
| OTOB-ABP-09 | 8 | 23 | 2 steps | h6 | stepped ABS pin |
| OTOB-ABP-10 | 8 | 30 | knurl · 3 steps | h6 | knurled-head ABS pin |
| OTOB-ABP-11 | 10 | 27 | 2 steps | h6 · ⌀10: 0/−0.009 | stepped ABS pin |
| OTOB-ABP-12 | 10 | 32 | taper | h6 · ⌀10: 0/−0.009 | ABS pin with tapered transition |
| OTOB-ABP-13 | 12 | 30 | 2 steps | h6 | stepped ABS pin |
| OTOB-ABP-14 | 12 | 39 | knurl · 3 steps | h6 | knurled-head ABS pin |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
ABS Pin is a Automotive Precision Parts family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀4–12 mm, lengths 15–39 mm, standard material Steel (also stainless steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀12 mm bar stock; its longest variant is OTOB-ABP-14 at 39 mm. Besides turning, the family requires taper turning and knurling. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is OTOB-ABP-08: 25 mm long at ⌀6 mm, L/D 4.2. This ratio is achievable on a conventional lathe as well; the sliding-head advantage in series work is that the part never leaves the machine, so the size does not drift from variant to variant.
Variants are machined to h6 tolerance; the smallest is OTOB-ABP-05 (⌀4 mm) and the largest OTOB-ABP-14 (⌀12 mm). The family includes tapered, knurled, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categoryLet Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.