Pivot Pin
Hardened stepped pivot pin forming a rotation axis for hinged parts.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 9 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| MAFA-PVP-03 | 5 | 15 | 2 steps | h6 | shouldered pivot |
| MAFA-PVP-04 | 6 | 19 | 2 steps | h6 · ⌀6: 0/−0.008 | shouldered pivot |
| MAFA-PVP-05 | 8 | 24 | 2 steps | h6 | shouldered pivot |
| MAFA-PVP-06 | 9 | 28 | 2 steps | h6 | shouldered pivot |
| MAFA-PVP-06B | 9 | 28 | ⌀4.2 · 2 steps | h6 | hollow lightweight pivot, M5 thread |
| MAFA-PVP-08 | 12 | 35 | 2 steps | h6 | shouldered pivot |
| MAFA-PVP-08B | 12 | 35 | ⌀5 · 2 steps | h6 | hollow lightweight pivot, M6 thread |
| MAFA-PVP-10 | 15 | 44 | 2 steps | h6 | shouldered pivot |
| MAFA-PVP-12 | 18 | 51 | 2 steps | h6 · ⌀18: 0/−0.011 | shouldered pivot |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Pivot Pin is a Joint & Pivot Elements family precision-turned on a Goodway SW-20, covering 9 variants — diameters ⌀5–18 mm, lengths 15–51 mm, standard material Stainless Steel (also steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀18 mm bar stock; its longest variant is MAFA-PVP-12 at 51 mm. Besides turning, the family requires axial drilling (⌀4.2–5 mm). All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is MAFA-PVP-04: 19 mm long at ⌀6 mm, L/D 3.2. This ratio is achievable on a conventional lathe as well; the sliding-head advantage in series work is that the part never leaves the machine, so the size does not drift from variant to variant.
Variants are machined to h6 tolerance; the smallest is MAFA-PVP-03 (⌀5 mm) and the largest MAFA-PVP-12 (⌀18 mm). The family includes bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.