Micro Pin
Cone-tipped plain micro pin for precise location and dowelling.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Tolerance | Std |
|---|---|---|---|---|
| MIKA-PIN-08 | 0.8 | 6 | m6 | — |
| MIKA-PIN-10 | 1 | 8 | m6 | — |
| MIKA-PIN-12 | 1.2 | 10 | m6 | — |
| MIKA-PIN-15 | 1.5 | 12 | m6 | — |
| MIKA-PIN-20 | 2 | 16 | m6 | — |
| MIKA-PIN-25 | 2.5 | 20 | m6 | — |
| MIKA-PIN-30 | 3 | 24 | m6 | — |
| MIKA-PIN-40 | 4 | 30 | m6 · ⌀4: +0.012/+0.004 | — |
| MIKA-PIN-50 | 5 | 36 | m6 · ⌀5: +0.012/+0.004 | — |
| MIKA-PIN-60 | 6 | 40 | m6 · ⌀6: +0.012/+0.004 | — |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Micro Pin is a Micro & Watch Parts family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀0.8–6 mm, lengths 6–40 mm, standard material Steel (also stainless steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀6 mm bar stock; its longest variant is MIKA-PIN-60 at 40 mm. The family is produced by turning alone. All of it is completed in a single setup, without the part leaving the machine.
The most slender variant is MIKA-PIN-12: 10 mm long at ⌀1.2 mm, a length-to-diameter ratio of 8.3. A part this slender needs tailstock support on a conventional lathe. On a sliding-head lathe the guide bushing holds the bar right next to the cutting edge, so the part is machined without a centre.
Variants are machined to m6 tolerance; the smallest is MIKA-PIN-08 (⌀0.8 mm) and the largest MIKA-PIN-60 (⌀6 mm). Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.