Conical Spray Nozzle
Threaded-body spray nozzle producing a full-cone pattern from its conical tip.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| NOZA-SPC-04 | 9.2 | 18 | M5 · SW8 · taper · ⌀0.8 | 6g | M5 male thread, full cone |
| NOZA-SPC-05 | 11.5 | 21 | M6 · SW10 · taper · ⌀1 | 6g | M6 male thread, full cone |
| NOZA-SPC-06 | 11.5 | 24 | M6 · SW10 · taper · ⌀1.2 | 6g | M6 male thread, full cone |
| NOZA-SPC-08 | 15 | 26 | M8 · SW13 · taper · ⌀1.5 | 6g | M8 male thread, full cone |
| NOZA-SPC-08L | 15 | 32 | M8 · SW13 · taper · ⌀1.5 | 6g | M8 long body, full cone |
| NOZA-SPC-10 | 19.6 | 30 | M10 · SW17 · taper · ⌀2 | 6g | M10 male thread, full cone |
| NOZA-SPC-10W | 19.6 | 28 | M10 · SW17 · taper · ⌀2.5 | 6g | M10 wide cone angle |
| NOZA-SPC-12 | 19.6 | 37 | M12 · SW17 · taper · ⌀2.5 | 6g | M12 male thread, full cone |
| NOZA-SPC-12F | 19.6 | 39 | M12 · SW17 · taper · ⌀3 | 6g | M12 flanged, full cone |
| NOZA-SPC-12X | 19.6 | 48 | M12 · SW17 · taper · ⌀3 | 6g | M12 extended body, full cone |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Conical Spray Nozzle is a Nozzles family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀9.2–19.6 mm, lengths 18–48 mm, standard material Stainless Steel (also steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is NOZA-SPC-12X at 48 mm. Besides turning, the family requires thread turning (5 sizes from M5 to M12), hex flat milling (AF 8–17), taper turning and axial drilling (⌀0.8–3 mm). All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is NOZA-SPC-12X: 48 mm long at ⌀19.6 mm, L/D 2.4. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to 6g tolerance; the smallest is NOZA-SPC-04 (⌀9.2 mm) and the largest NOZA-SPC-12X (⌀19.6 mm). The family includes threaded, hex-drive, tapered, bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.