Lubricated Bushing
Plain sliding bushing with oil groove and grease nipple seat.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 9 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| BURB-LUB-05 | 9 | 12 | ⌀5 | e7 | oil-grooved plain bush 5 mm |
| BURB-LUB-06 | 10 | 14 | ⌀6 | e7 | oil-grooved plain bush 6 mm |
| BURB-LUB-08 | 12 | 16 | ⌀8 | e7 | oil-grooved plain bush 8 mm |
| BURB-LUB-10 | 14 | 18 | ⌀10 | e7 | oil-grooved plain bush 10 mm |
| BURB-LUB-08F | 16 | 19 | ⌀8 · 2 steps | e7 | flanged lubricated bush 8 mm |
| BURB-LUB-12 | 16 | 20 | ⌀12 | e7 | oil-grooved plain bush 12 mm |
| BURB-LUB-14 | 18 | 22 | ⌀14 | e7 | oil-grooved plain bush 14 mm |
| BURB-LUB-12F | 20 | 24 | ⌀12 · 2 steps | e7 | flanged lubricated bush 12 mm |
| BURB-LUB-15 | 20 | 24 | ⌀15 | e7 | oil-grooved plain bush 15 mm |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Lubricated Bushing is a Bushings family precision-turned on a Goodway SW-20, covering 9 variants — diameters ⌀9–20 mm, lengths 12–24 mm, standard material Brass (also steel, stainless steel or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is BURB-LUB-12F at 24 mm. The family is produced by turning alone. Bores in this family run ⌀5–15 mm. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is BURB-LUB-06: 14 mm long at ⌀10 mm, L/D 1.4. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to e7 tolerance; the smallest is BURB-LUB-05 (⌀9 mm) and the largest BURB-LUB-15 (⌀20 mm). The family includes bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categoryLet Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.