Flanged Sleeve Bushing
Stepped sleeve bushing with an axial thrust flange at one end.
Manufacturing Scope
Flanged Sleeve Bushing is a Bushings family precision-turned on a Goodway SW-20, covering 9 variants — diameters ⌀9–20 mm, lengths 7.5–31.5 mm, standard material Brass (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is BURA-FLN-14L at 31.5 mm. The family is produced by turning alone. Bores in this family run ⌀4–16 mm. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is BURA-FLN-14L: 31.5 mm long at ⌀20 mm, L/D 1.6. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to H7/e8 tolerance; the smallest is BURA-FLN-04 (⌀9 mm) and the largest BURA-FLN-16 (⌀20 mm). The family includes bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 9 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| BURA-FLN-04 | ⌀9 | 7.5 mm | ⌀4 · 2 steps | H7/e8 | flange Ø9 / inside dia Ø4 | 27.74 ₺ |
| BURA-FLN-05 | ⌀11 | 10 mm | ⌀5 · 2 steps | H7/e8 | flange Ø11 / inside dia Ø5 | 31.51 ₺ |
| BURA-FLN-06 | ⌀12 | 12 mm | ⌀6 · 2 steps | H7/e8 | flange Ø12 / inside dia Ø6 | 34.11 ₺ |
| BURA-FLN-08 | ⌀14 | 14.5 mm | ⌀8 · 2 steps | H7/e8 | flange Ø14 / inside dia Ø8 | 38.55 ₺ |
| BURA-FLN-10 | ⌀16 | 18 mm | ⌀10 · 2 steps | H7/e8 | flange Ø16 / inside dia Ø10 | 44.74 ₺ |
| BURA-FLN-12 | ⌀18 | 19 mm | ⌀12 · 2 steps | H7/e8 | flange Ø18 / inside dia Ø12 | 48.54 ₺ |
| BURA-FLN-14 | ⌀20 | 21.5 mm | ⌀14 · 2 steps | H7/e8 | flange Ø20 / inside dia Ø14 | 54.91 ₺ |
| BURA-FLN-14L | ⌀20 | 31.5 mm | ⌀14 · 2 steps | H7/e8 | long body, flange Ø20 / inside dia Ø14 | 68.21 ₺ |
| BURA-FLN-16 | ⌀20 | 23 mm | ⌀16 · 2 steps | H7/e8 | thin flange Ø20 / inside dia Ø16 | 53.71 ₺ |
Brass · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.