External Fixator Pin
External fixator pin with hex drive head and central threaded holding zone.
Manufacturing Scope
External Fixator Pin is a Medical & Dental Parts family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀6.4–19.6 mm, lengths 74–208 mm, standard material Stainless Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀20 mm bar stock. Besides turning, the family requires thread turning (10 sizes from M2.5 to M10), hex flat milling (AF 5.5–17) and taper turning. One variant, MEDA-FXP-10, is 208 mm long and exceeds the machine's 207 mm single-setup limit; that size is produced in two setups.
The most slender variant is MEDA-FXP-50: 129 mm long at ⌀9.2 mm, a length-to-diameter ratio of 14.0. This ratio is the very reason sliding-head lathes exist. The guide bushing supports the bar immediately beside the cutting point, so there is no deflection; the same part chatters and drifts in diameter on a conventional lathe.
Variants are machined to 6g tolerance; the smallest is MEDA-FXP-25 (⌀6.4 mm) and the largest MEDA-FXP-10 (⌀19.6 mm). The family includes threaded, hex-drive, tapered, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| MEDA-FXP-25 | ⌀6.4 | 74 mm | M2.5 · SW5.5 · taper | 6g | hex drive | 88.27 ₺ |
| MEDA-FXP-30 | ⌀6.4 | 85 mm | M3 · SW5.5 · taper | 6g | hex drive | 97.39 ₺ |
| MEDA-FXP-35 | ⌀8.1 | 96 mm | M3.5 · SW7 · taper | 6g | hex drive | 130.70 ₺ |
| MEDA-FXP-40 | ⌀8.1 | 107 mm | M4 · SW7 · taper | 6g | hex drive | 122.67 ₺ |
| MEDA-FXP-45 | ⌀9.2 | 118 mm | M4.5 · SW8 · taper | 6g | hex drive | 161.68 ₺ |
| MEDA-FXP-50 | ⌀9.2 | 129 mm | M5 · SW8 · taper | 6g | hex drive | 149.57 ₺ |
| MEDA-FXP-60 | ⌀11.5 | 145 mm | M6 · SW10 · taper | 6g | hex drive | 214.94 ₺ |
| MEDA-FXP-70 | ⌀11.5 | 161 mm | M7 · SW10 · taper | 6g | hex drive | 235.93 ₺ |
| MEDA-FXP-80 | ⌀15 | 177 mm | M8 · SW13 · taper | 6g | hex drive | 342.53 ₺ |
| MEDA-FXP-10 | ⌀19.6 | 208 mm | M10 · SW17 · taper | 6g | hex drive | Quote |
Stainless Steel · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categoryLet Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.