Cam Shaft
Stepped drive shaft with threaded end transmitting motion.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 11 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| TEKB-KAM-05 | 5 | 38 | M4 | 6g | — |
| TEKB-KAM-06 | 6 | 46 | M5 | 6g | — |
| TEKB-KAM-08 | 8 | 56 | M6 | 6g | — |
| TEKB-KAM-08S | 10 | 56 | M6 | 6g | two-step |
| TEKB-KAM-10 | 10 | 64 | M8 | 6g | — |
| TEKB-KAM-10K | 10 | 68 | M8 · knurl | 6g | knurled grip |
| TEKB-KAM-12 | 12 | 74 | M10 | 6g | — |
| TEKB-KAM-12S | 14 | 70 | M10 | 6g | shouldered shaft |
| TEKB-KAM-14 | 14 | 80 | M10 | 6g | — |
| TEKB-KAM-16 | 16 | 88 | M12 | 6g | — |
| TEKB-KAM-16B | 16 | 90 | M12 · ⌀6 | 6g | internal oil channel ø6 |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Cam Shaft is a Textile Machine Parts family precision-turned on a Goodway SW-20, covering 11 variants — diameters ⌀5–16 mm, lengths 38–90 mm, standard material Steel (also stainless steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀16 mm bar stock; its longest variant is TEKB-KAM-16B at 90 mm. Besides turning, the family requires thread turning (6 sizes from M4 to M12), knurling and axial drilling (⌀6 mm). All of it is completed in a single setup, without the part leaving the machine.
The most slender variant is TEKB-KAM-06: 46 mm long at ⌀6 mm, a length-to-diameter ratio of 7.7. A part this slender needs tailstock support on a conventional lathe. On a sliding-head lathe the guide bushing holds the bar right next to the cutting edge, so the part is machined without a centre.
Variants are machined to 6g tolerance; the smallest is TEKB-KAM-05 (⌀5 mm) and the largest TEKB-KAM-16B (⌀16 mm). The family includes threaded, knurled, bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categoryLet Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.