Eyelet Guide
Polished eyelet guide with cone-mouthed ends passing the thread through a bore.
Manufacturing Scope
Eyelet Guide is a Textile Machine Parts family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀6–18 mm, lengths 8–18 mm, standard material Stainless Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀18 mm bar stock; its longest variant is TEKA-EYG-14 at 18 mm. Besides turning, the family requires thread turning (M6, M8), hex flat milling (AF 13) and axial drilling (⌀1.5–6 mm). All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is TEKA-EYG-08T: 17 mm long at ⌀12 mm, L/D 1.4. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to h8, 6g tolerance classes; the smallest is TEKA-EYG-04 (⌀6 mm) and the largest TEKA-EYG-14 (⌀18 mm). The family includes threaded, hex-drive, bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| TEKA-EYG-04 | ⌀6 | 8 mm | ⌀1.5 | h8 | bore 1.5, polished | 26.21 ₺ |
| TEKA-EYG-05 | ⌀7 | 9 mm | ⌀2 | h8 | bore 2.0, polished | 27.68 ₺ |
| TEKA-EYG-06 | ⌀8 | 10 mm | ⌀2.5 | h8 | bore 2.5, polished | 29.29 ₺ |
| TEKA-EYG-06T | ⌀10 | 14 mm | M6 · ⌀2.5 | 6g | bore 2.5, M6 body | 39.28 ₺ |
| TEKA-EYG-08 | ⌀10 | 12 mm | ⌀3 | h8 | bore 3.0, polished | 33.02 ₺ |
| TEKA-EYG-08T | ⌀12 | 17 mm | M8 · ⌀3 | 6g | bore 3.0, M8 body | 45.39 ₺ |
| TEKA-EYG-10 | ⌀13 | 14 mm | ⌀4 | h8 | bore 4.0, polished | 39.01 ₺ |
| TEKA-EYG-08H | ⌀15 | 14 mm | SW13 · ⌀3 | h8 | bore 3.0, hex cap | 62.91 ₺ |
| TEKA-EYG-12 | ⌀16 | 16 mm | ⌀5 | h8 | bore 5.0, polished | 46.67 ₺ |
| TEKA-EYG-14 | ⌀18 | 18 mm | ⌀6 | h8 | bore 6.0, polished | 53.85 ₺ |
Stainless Steel · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.