Shuttle Pin
Hardened wear-resistant pin guiding the shuttle in a weaving loom.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| TEKB-MKP-04 | 4 | 22 | — | h7 · ⌀4: 0/−0.012 | hardened |
| TEKB-MKP-05 | 5 | 26 | — | h7 · ⌀5: 0/−0.012 | — |
| TEKB-MKP-06 | 6 | 30 | — | h7 · ⌀6: 0/−0.012 | — |
| TEKB-MKP-06H | 8 | 33 | 2 steps | h7 | stepped head |
| TEKB-MKP-08 | 8 | 34 | — | h7 · ⌀8: 0/−0.015 | — |
| TEKB-MKP-08T | 8 | 32 | M6 | 6g | with threaded end |
| TEKB-MKP-10 | 10 | 40 | — | h7 · ⌀10: 0/−0.015 | — |
| TEKB-MKP-10S | 12 | 42 | 2 steps | h7 | stepped back |
| TEKB-MKP-12 | 12 | 46 | — | h7 · ⌀12: 0/−0.018 | — |
| TEKB-MKP-12D | 12 | 48 | ⌀4 | h7 · ⌀12: 0/−0.018 | oil hole ø4 |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Shuttle Pin is a Textile Machine Parts family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀4–12 mm, lengths 22–48 mm, standard material Steel (also stainless steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀12 mm bar stock; its longest variant is TEKB-MKP-12D at 48 mm. Besides turning, the family requires thread turning (M6) and axial drilling (⌀4 mm). All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is TEKB-MKP-04: 22 mm long at ⌀4 mm, L/D 5.5. This ratio is achievable on a conventional lathe as well; the sliding-head advantage in series work is that the part never leaves the machine, so the size does not drift from variant to variant.
Variants are machined to h7, 6g tolerance classes; the smallest is TEKB-MKP-04 (⌀4 mm) and the largest TEKB-MKP-12D (⌀12 mm). The family includes threaded, bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categoryLet Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.