Set Screw Dog Point DIN 915
Hex socket dog-point set screw for locating into a mating bore.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 11 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| BAGA-915-01 | 3 | 9.5 | M3 | 6g | DIN 915 – dog point, hex socket 1.5mm |
| BAGA-915-02 | 3 | 13.5 | M3 | 6g | DIN 915 – dog point |
| BAGA-915-03 | 4 | 10 | M4 | 6g | DIN 915 – dog point, hex socket 2mm |
| BAGA-915-04 | 4 | 18 | M4 | 6g | DIN 915 – dog point |
| BAGA-915-05 | 5 | 12.5 | M5 | 6g | DIN 915 – dog point, hex socket 2.5mm |
| BAGA-915-06 | 5 | 22.5 | M5 | 6g | DIN 915 – dog point |
| BAGA-915-07 | 6 | 15 | M6 | 6g | DIN 915 – dog point, hex socket 3mm |
| BAGA-915-08 | 6 | 28 | M6 | 6g | DIN 915 – dog point |
| BAGA-915-09 | 8 | 18 | M8 | 6g | DIN 915 – dog point, hex socket 4mm |
| BAGA-915-10 | 8 | 34 | M8 | 6g | DIN 915 – dog point |
| BAGA-915-11 | 10 | 23 | M10 | 6g | DIN 915 – dog point, hex socket 5mm |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Set Screw Dog Point DIN 915 is a Fasteners family precision-turned on a Goodway SW-20, covering 11 variants — diameters ⌀3–10 mm, lengths 9.5–34 mm, standard material Steel (also stainless steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀10 mm bar stock; its longest variant is BAGA-915-10 at 34 mm. Besides turning, the family requires thread turning (6 sizes from M3 to M10). All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is BAGA-915-08: 28 mm long at ⌀6 mm, L/D 4.7. This ratio is achievable on a conventional lathe as well; the sliding-head advantage in series work is that the part never leaves the machine, so the size does not drift from variant to variant.
Variants are machined to 6g tolerance; the smallest is BAGA-915-01 (⌀3 mm) and the largest BAGA-915-11 (⌀10 mm). The family includes threaded, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categoryLet Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.