Double-End Stud
Stud threaded on both ends with a plain shank between, one end seated into the body.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| BAGB-DES-01 | 4 | 28 | M4 | 6g | M4 double-threaded |
| BAGB-DES-02 | 4 | 40 | M4 | 6g | M4 double-threaded, long |
| BAGB-DES-03 | 5 | 36 | M5 | 6g | M5 double-threaded |
| BAGB-DES-04 | 5 | 50 | M5 | 6g | M5 double-threaded, long |
| BAGB-DES-05 | 6 | 44 | M6 | 6g | M6 double-threaded |
| BAGB-DES-06 | 6 | 64 | M6 | 6g | M6 double-threaded, long |
| BAGB-DES-07 | 8 | 57 | M8 | 6g | M8 double-threaded |
| BAGB-DES-08 | 8 | 82 | M8 | 6g | M8 double-threaded, long |
| BAGB-DES-09 | 10 | 70 | M10 | 6g | M10 double-threaded |
| BAGB-DES-10 | 10 | 100 | M10 | 6g | M10 double-threaded, long |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Double-End Stud is a Fasteners family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀4–10 mm, lengths 28–100 mm, standard material Steel (also stainless steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀10 mm bar stock; its longest variant is BAGB-DES-10 at 100 mm. Besides turning, the family requires thread turning (5 sizes from M4 to M10). All of it is completed in a single setup, without the part leaving the machine.
The most slender variant is BAGB-DES-06: 64 mm long at ⌀6 mm, a length-to-diameter ratio of 10.7. This ratio is the very reason sliding-head lathes exist. The guide bushing supports the bar immediately beside the cutting point, so there is no deflection; the same part chatters and drifts in diameter on a conventional lathe.
Variants are machined to 6g tolerance; the smallest is BAGB-DES-01 (⌀4 mm) and the largest BAGB-DES-10 (⌀10 mm). The family includes threaded, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.