Threaded-Shank Electrode
Copper electrode with threaded shank screwing directly into the EDM holder.
Manufacturing Scope
Threaded-Shank Electrode is a Electrodes & EDM Tips family precision-turned on a Goodway SW-20, covering 9 variants — diameters ⌀6–16 mm, lengths 36–64 mm, standard material Brass (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
Variants are machined to 6g tolerance; the smallest is ELEB-THR-04 (⌀6 mm) and the largest ELEB-THR-12 (⌀16 mm). The family includes threaded, tapered, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| ELEB-THR-04 | ⌀6 | 36 mm | M4 | 6g | M4 bağlantı |
| ELEB-THR-05 | ⌀8 | 41 mm | M5 | 6g | M5 bağlantı |
| ELEB-THR-06 | ⌀10 | 46 mm | M6 | 6g | M6 bağlantı |
| ELEB-THR-06B | ⌀10 | 48 mm | M6 · taper | 6g | M6 bağlantı konik uç |
| ELEB-THR-08 | ⌀12 | 52 mm | M8 | 6g | M8 bağlantı |
| ELEB-THR-08B | ⌀12 | 54 mm | M8 · taper | 6g | M8 bağlantı konik uç |
| ELEB-THR-10 | ⌀14 | 58 mm | M10 | 6g | M10 bağlantı |
| ELEB-THR-10B | ⌀14 | 60 mm | M10 · taper | 6g | M10 bağlantı konik uç |
| ELEB-THR-12 | ⌀16 | 64 mm | M12 | 6g | M12 bağlantı |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categoryLet Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.