Threaded Fixing Pin
Locating pin with a threaded fixing end and a cylindrical guide nose at the opposite end.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| PIMA-TFP-03 | 4 | 22 | M3 | h8 · ⌀4: 0/−0.018 | — |
| PIMA-TFP-04 | 5 | 28 | M4 | h8 · ⌀5: 0/−0.018 | — |
| PIMA-TFP-05 | 6 | 34 | M5 | h8 · ⌀6: 0/−0.018 | — |
| PIMA-TFP-06 | 8 | 40 | M6 | h8 · ⌀8: 0/−0.022 | — |
| PIMA-TFP-05C | 8 | 38 | M5 | h8 | shouldered |
| PIMA-TFP-08 | 10 | 46 | M8 | h8 · ⌀10: 0/−0.022 | — |
| PIMA-TFP-06C | 10 | 45 | M6 | h8 · ⌀10: 0/−0.022 | shouldered |
| PIMA-TFP-10 | 12 | 58 | M10 | h8 · ⌀12: 0/−0.027 | — |
| PIMA-TFP-08C | 12 | 54 | M8 | h8 | shouldered |
| PIMA-TFP-12 | 14 | 69 | M12 | h8 · ⌀14: 0/−0.027 | — |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Threaded Fixing Pin is a Pins family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀4–14 mm, lengths 22–69 mm, standard material Steel (also stainless steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀14 mm bar stock; its longest variant is PIMA-TFP-12 at 69 mm. Besides turning, the family requires thread turning (7 sizes from M3 to M12). All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is PIMA-TFP-05: 34 mm long at ⌀6 mm, L/D 5.7. This ratio is achievable on a conventional lathe as well; the sliding-head advantage in series work is that the part never leaves the machine, so the size does not drift from variant to variant.
Variants are machined to h8 tolerance; the smallest is PIMA-TFP-03 (⌀4 mm) and the largest PIMA-TFP-12 (⌀14 mm). The family includes threaded, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.