Threaded Spacer Washer
Cylindrical spacer washer with internal thread for bolt-locked spacing.
Manufacturing Scope
Threaded Spacer Washer is a Spacers & Standoffs family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀8–20 mm, lengths 5–16 mm, standard material Brass (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is ARAG-THR-20 at 16 mm. The family is produced by turning alone. Bores in this family run ⌀5–13 mm. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is ARAG-THR-20: 16 mm long at ⌀20 mm, L/D 0.8. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to h9 tolerance; the smallest is ARAG-THR-08 (⌀8 mm) and the largest ARAG-THR-20 (⌀20 mm). The family includes bored variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| ARAG-THR-08 | ⌀8 | 5 mm | ⌀5 | h9 | M3 internal thread | 23.10 ₺ |
| ARAG-THR-09 | ⌀9 | 6 mm | ⌀5 | h9 | M3 internal thread | 24.48 ₺ |
| ARAG-THR-10 | ⌀10 | 6 mm | ⌀6.5 | h9 | M4 internal thread | 24.87 ₺ |
| ARAG-THR-11 | ⌀11 | 7 mm | ⌀6.5 | h9 | M4 internal thread | 26.59 ₺ |
| ARAG-THR-12 | ⌀12 | 8 mm | ⌀8 | h9 | M5 internal thread | 27.86 ₺ |
| ARAG-THR-14 | ⌀14 | 10 mm | ⌀8 | h9 | M5 internal thread | 32.75 ₺ |
| ARAG-THR-15 | ⌀15 | 10 mm | ⌀10 | h9 | M6 internal thread | 32.94 ₺ |
| ARAG-THR-16 | ⌀16 | 12 mm | ⌀10 | h9 | M6 internal thread | 37.33 ₺ |
| ARAG-THR-18 | ⌀18 | 14 mm | ⌀13 | h9 | M8 internal thread | 41.07 ₺ |
| ARAG-THR-20 | ⌀20 | 16 mm | ⌀13 | h9 | M8 internal thread | 50.48 ₺ |
Brass · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.