End Cap
Decorative end cap with blind bore and domed or conical tip for tube ends.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 11 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| OZEB-CAP-06 | 6 | 8 | ⌀4 | h10 | blind bore ⌀4,, dome end |
| OZEB-CAP-07 | 7 | 9 | ⌀5 | h10 | blind bore ⌀5,, dome end |
| OZEB-CAP-08 | 8 | 12 | ⌀4 · 2 steps | h10 | shouldered cap, blind bore ⌀4,, cone end |
| OZEB-CAP-10 | 10 | 10 | ⌀6 | h10 | blind bore ⌀6,, dome end |
| OZEB-CAP-11 | 11 | 14 | taper · ⌀6 | h10 | blind bore ⌀6,, tapering end |
| OZEB-CAP-12 | 12 | 10 | ⌀7 | h10 | blind bore ⌀7,, dome end |
| OZEB-CAP-13 | 13 | 14 | knurl · ⌀7 · 2 steps | h10 | knurled skirt, blind bore ⌀7,, dome end |
| OZEB-CAP-14 | 14 | 12 | ⌀8 | h10 | blind bore ⌀8,, dome end |
| OZEB-CAP-16 | 16 | 18 | taper · ⌀9 | h10 | blind bore ⌀9,, tapering end |
| OZEB-CAP-18 | 18 | 12 | ⌀11 | h10 | blind bore ⌀11,, dome end |
| OZEB-CAP-20 | 20 | 18 | knurl · ⌀12 · 2 steps | h10 | max envelope, knurled skirt, blind bore ⌀12 |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
End Cap is a Custom Turned Parts family precision-turned on a Goodway SW-20, covering 11 variants — diameters ⌀6–20 mm, lengths 8–18 mm, standard material Stainless Steel (also steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is OZEB-CAP-16 at 18 mm. Besides turning, the family requires taper turning and knurling. Bores in this family run ⌀4–12 mm. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is OZEB-CAP-08: 12 mm long at ⌀8 mm, L/D 1.5. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to h10 tolerance; the smallest is OZEB-CAP-06 (⌀6 mm) and the largest OZEB-CAP-20 (⌀20 mm). The family includes tapered, knurled, bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categoryLet Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.