Pusher Rod
Straight pneumatic pusher rod with double-end chamfer and precision diameter tolerance.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 11 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| HIDA-ITM-04 | 4 | 40 | — | f7 · ⌀4: −0.010/−0.022 | — |
| HIDA-ITM-05 | 5 | 50 | — | f7 · ⌀5: −0.010/−0.022 | — |
| HIDA-ITM-06 | 6 | 60 | — | f7 · ⌀6: −0.010/−0.022 | — |
| HIDA-ITM-06C | 6 | 55 | — | f7 · ⌀6: −0.010/−0.022 | tapered thrust tip |
| HIDA-ITM-08 | 8 | 70 | — | f7 · ⌀8: −0.013/−0.028 | — |
| HIDA-ITM-08S | 8 | 55 | 2 steps | f7 | two-step pusher |
| HIDA-ITM-10 | 10 | 80 | — | f7 · ⌀10: −0.013/−0.028 | — |
| HIDA-ITM-10C | 10 | 75 | — | f7 · ⌀10: −0.013/−0.028 | cone point |
| HIDA-ITM-12 | 12 | 90 | — | f7 · ⌀12: −0.016/−0.034 | — |
| HIDA-ITM-14 | 14 | 100 | — | f7 · ⌀14: −0.016/−0.034 | — |
| HIDA-ITM-16 | 16 | 120 | — | f7 · ⌀16: −0.016/−0.034 | — |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Pusher Rod is a Hydraulic & Pneumatic Pistons family precision-turned on a Goodway SW-20, covering 11 variants — diameters ⌀4–16 mm, lengths 40–120 mm, standard material Stainless Steel (also steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀16 mm bar stock; its longest variant is HIDA-ITM-16 at 120 mm. The family is produced by turning alone. All of it is completed in a single setup, without the part leaving the machine.
The most slender variant is HIDA-ITM-04: 40 mm long at ⌀4 mm, a length-to-diameter ratio of 10.0. This ratio is the very reason sliding-head lathes exist. The guide bushing supports the bar immediately beside the cutting point, so there is no deflection; the same part chatters and drifts in diameter on a conventional lathe.
Variants are machined to f7 tolerance; the smallest is HIDA-ITM-04 (⌀4 mm) and the largest HIDA-ITM-16 (⌀16 mm). The family includes multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categoryLet Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.