Threaded Guide Bushing
Screw-in guide bushing with head and central bore.
Manufacturing Scope
Threaded Guide Bushing is a Hydraulic & Pneumatic Pistons family precision-turned on a Goodway SW-20, covering 9 variants — diameters ⌀12–20 mm, lengths 16–27 mm, standard material Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is HIDB-TGB-14 at 27 mm. Besides turning, the family requires thread turning (M10, M12). Bores in this family run ⌀6–14 mm. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is HIDB-TGB-14: 27 mm long at ⌀20 mm, L/D 1.4. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to 6g tolerance; the smallest is HIDB-TGB-06 (⌀12 mm) and the largest HIDB-TGB-14 (⌀20 mm). The family includes threaded, bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 9 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| HIDB-TGB-06 | ⌀12 | 16 mm | M10 · ⌀6 | 6g | H7 bore | 32.97 ₺ |
| HIDB-TGB-07 | ⌀13 | 16 mm | M10 · ⌀7 | 6g | H7 bore | 35.97 ₺ |
| HIDB-TGB-08 | ⌀15 | 19 mm | M12 · ⌀8 | 6g | H7 bore | 39.24 ₺ |
| HIDB-TGB-09 | ⌀16 | 19 mm | M12 · ⌀9 | 6g | H7 bore | 39.72 ₺ |
| HIDB-TGB-10 | ⌀17 | 22 mm | M12 · ⌀10 | 6g | H7 bore | 42.61 ₺ |
| HIDB-TGB-11 | ⌀18 | 22 mm | M12 · ⌀11 | 6g | H7 bore | 46.57 ₺ |
| HIDB-TGB-12 | ⌀19 | 24 mm | M12 · ⌀12 | 6g | H7 bore | 49.33 ₺ |
| HIDB-TGB-13 | ⌀20 | 25 mm | M12 · ⌀13 | 6g | H7 bore | 50.58 ₺ |
| HIDB-TGB-14 | ⌀20 | 27 mm | M12 · ⌀14 | 6g | H7 bore | 52.66 ₺ |
Steel · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.