Angular Pin
Tapered-body angular pin with chamfered ends that drives the slide sideways.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 8 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| KALA-ANG-01 | 6 | 61 | taper | h7 · ⌀6: 0/−0.012 | angle 15° |
| KALA-ANG-02 | 7 | 71 | taper | h7 | angle 15° |
| KALA-ANG-03 | 8 | 84 | taper | h7 · ⌀8: 0/−0.015 | angle 18° |
| KALA-ANG-04 | 10 | 94 | taper | h7 · ⌀10: 0/−0.015 | angle 18° |
| KALA-ANG-05 | 12 | 107 | taper | h7 | angle 20° |
| KALA-ANG-06 | 14 | 117 | taper | h7 · ⌀14: 0/−0.018 | angle 20° |
| KALA-ANG-07 | 16 | 129 | taper | h7 · ⌀16: 0/−0.018 | angle 22° |
| KALA-ANG-08 | 18 | 139 | taper | h7 · ⌀18: 0/−0.018 | angle 25° |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Angular Pin is a Mold & Die Components family precision-turned on a Goodway SW-20, covering 8 variants — diameters ⌀6–18 mm, lengths 61–139 mm, standard material Steel (also stainless steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀18 mm bar stock; its longest variant is KALA-ANG-08 at 139 mm. Besides turning, the family requires taper turning. All of it is completed in a single setup, without the part leaving the machine.
The most slender variant is KALA-ANG-03: 84 mm long at ⌀8 mm, a length-to-diameter ratio of 10.5. This ratio is the very reason sliding-head lathes exist. The guide bushing supports the bar immediately beside the cutting point, so there is no deflection; the same part chatters and drifts in diameter on a conventional lathe.
Variants are machined to h7 tolerance; the smallest is KALA-ANG-01 (⌀6 mm) and the largest KALA-ANG-08 (⌀18 mm). The family includes tapered, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categoryLet Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.