Set Screw
Hex-socket headless set screw for position locking and clearance take-up.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 12 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| TESB-SET-M2 | 2 | 4 | M2 | 6g | DIN 913 flat point |
| TESB-SET-M2C | 2 | 5 | M2 | 6g | DIN 914 tapered tip |
| TESB-SET-M3 | 3 | 6 | M3 | 6g | DIN 913 flat point |
| TESB-SET-M3C | 3 | 8 | M3 | 6g | DIN 914 tapered tip |
| TESB-SET-M4 | 4 | 8 | M4 | 6g | DIN 913 flat point |
| TESB-SET-M4C | 4 | 10 | M4 | 6g | DIN 914 tapered tip |
| TESB-SET-M5 | 5 | 10 | M5 | 6g | DIN 913 flat point |
| TESB-SET-M5C | 5 | 12 | M5 | 6g | DIN 914 tapered tip |
| TESB-SET-M6 | 6 | 12 | M6 | 6g | DIN 913 flat point |
| TESB-SET-M6C | 6 | 16 | M6 | 6g | DIN 914 tapered tip |
| TESB-SET-M8 | 8 | 16 | M8 | 6g | DIN 913 flat point |
| TESB-SET-M8C | 8 | 20 | M8 | 6g | DIN 914 tapered tip |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Set Screw is a Fixing & Locating family precision-turned on a Goodway SW-20, covering 12 variants — diameters ⌀2–8 mm, lengths 4–20 mm, standard material Steel (also stainless steel, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀8 mm bar stock; its longest variant is TESB-SET-M8C at 20 mm. Besides turning, the family requires thread turning (6 sizes from M2 to M8). All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is TESB-SET-M3C: 8 mm long at ⌀3 mm, L/D 2.7. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to 6g tolerance; the smallest is TESB-SET-M2 (⌀2 mm) and the largest TESB-SET-M8C (⌀8 mm). The family includes threaded variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categoryLet Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.