Hex-Body Contact
Hex-body threaded contact; the wrench flats let it clamp as a panel-mount threaded terminal.
Manufacturing Scope
Hex-Body Contact is a Connector Pins family precision-turned on a Goodway SW-20, covering 9 variants — diameters ⌀6.4–19.6 mm, lengths 13–38 mm, standard material Brass (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
Variants are machined to 6g tolerance; the smallest is KONA-HEX-20 (⌀6.4 mm) and the largest KONA-HEX-60 (⌀19.6 mm). The family includes threaded, hex-drive, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| KONA-HEX-20 | ⌀6.4 | 13 mm | M3 · SW5.5 | 6g | panel montaj |
| KONA-HEX-25 | ⌀8.1 | 16 mm | M4 · SW7 | 6g | panel montaj |
| KONA-HEX-25B | ⌀8.1 | 24 mm | M4 · SW7 | 6g | — |
| KONA-HEX-30 | ⌀9.2 | 19 mm | M5 · SW8 | 6g | panel montaj |
| KONA-HEX-40 | ⌀11.5 | 22 mm | M6 · SW10 | 6g | panel montaj |
| KONA-HEX-40B | ⌀11.5 | 32 mm | M6 · SW10 | 6g | — |
| KONA-HEX-50 | ⌀15 | 26 mm | M8 · SW13 | 6g | panel montaj |
| KONA-HEX-50B | ⌀15 | 38 mm | M8 · SW13 | 6g | — |
| KONA-HEX-60 | ⌀19.6 | 32 mm | M10 · SW17 | 6g | panel montaj |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categoryLet Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.