Female Threaded Contact
Female contact with internal thread; screw connection allows a high-current terminal and re-mountable assembly.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 9 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| KONA-FTC-20 | 4 | 20 | ⌀1.6 · 2 steps | 6H | M2 thread |
| KONA-FTC-25 | 5 | 23 | ⌀2.5 · 2 steps | 6H | M3 thread |
| KONA-FTC-30 | 6 | 26 | ⌀3.3 · 2 steps | 6H | M4 thread |
| KONA-FTC-40 | 8 | 30 | ⌀4.2 · 2 steps | 6H | M5 thread |
| KONA-FTC-50 | 10 | 34 | ⌀5 · 2 steps | 6H | M6 thread |
| KONA-FTC-60 | 12 | 40 | ⌀6.8 · 2 steps | 6H | M8 thread |
| KONA-FTC-70 | 14 | 44 | ⌀8.5 · 2 steps | 6H | M10 thread |
| KONA-FTC-80 | 16 | 50 | ⌀10.2 · 2 steps | 6H | M12 thread |
| KONA-FTC-90 | 18 | 56 | ⌀10.2 · 2 steps | 6H | M12 thread |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Female Threaded Contact is a Connector Pins family precision-turned on a Goodway SW-20, covering 9 variants — diameters ⌀4–18 mm, lengths 20–56 mm, standard material Brass (also steel, stainless steel or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀18 mm bar stock; its longest variant is KONA-FTC-90 at 56 mm. The family is produced by turning alone. Bores in this family run ⌀1.6–10.2 mm. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is KONA-FTC-20: 20 mm long at ⌀4 mm, L/D 5.0. This ratio is achievable on a conventional lathe as well; the sliding-head advantage in series work is that the part never leaves the machine, so the size does not drift from variant to variant.
Variants are machined to 6H tolerance; the smallest is KONA-FTC-20 (⌀4 mm) and the largest KONA-FTC-90 (⌀18 mm). The family includes bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.