Magnetic Pin Housing
Magnetic pin housing bored for a magnet insert with a threaded mounting tail.
Manufacturing Scope
Magnetic Pin Housing is a Membrane Press Spares family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀8–20 mm, lengths 18–38 mm, standard material Stainless Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is MEMA-MPG-12 at 38 mm. Besides turning, the family requires thread turning (6 sizes from M4 to M12) and hex flat milling (AF 8–13). Bores in this family run ⌀4–12 mm. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is MEMA-MPG-05H: 26 mm long at ⌀10 mm, L/D 2.6. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to 6g, h7 tolerance classes; the smallest is MEMA-MPG-04 (⌀8 mm) and the largest MEMA-MPG-12 (⌀20 mm). The family includes threaded, hex-drive, bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| MEMA-MPG-04 | ⌀8 | 18 mm | M4 · ⌀4 | 6g | magnet pocket Ø4×5 | 39.69 ₺ |
| MEMA-MPG-04P | ⌀8 | 18 mm | ⌀4 · 2 steps | h7 | press-fit mount, magnet pocket Ø4 | 44.66 ₺ |
| MEMA-MPG-05 | ⌀10 | 22 mm | M5 · ⌀5 | 6g | magnet pocket Ø5×6 | 48.87 ₺ |
| MEMA-MPG-05H | ⌀10 | 26 mm | M5 · SW8 · ⌀5 | 6g | AF8 spanner flats, magnet Ø5 | 67.56 ₺ |
| MEMA-MPG-06 | ⌀12 | 26 mm | M6 · ⌀6 | 6g | magnet pocket Ø6×8 | 57.30 ₺ |
| MEMA-MPG-06H | ⌀12 | 31 mm | M6 · SW10 · ⌀6 | 6g | AF10 spanner flats, magnet Ø6 | 79.78 ₺ |
| MEMA-MPG-08 | ⌀15 | 30 mm | M8 · ⌀8 | 6g | magnet pocket Ø8×10 | 73.53 ₺ |
| MEMA-MPG-08H | ⌀15 | 36 mm | M8 · SW13 · ⌀8 | 6g | AF13 spanner flats, magnet Ø8 | 100.65 ₺ |
| MEMA-MPG-10 | ⌀18 | 34 mm | M10 · ⌀10 | 6g | magnet pocket Ø10×12 | 90.18 ₺ |
| MEMA-MPG-12 | ⌀20 | 38 mm | M12 · ⌀12 | 6g | magnet pocket Ø12×14 | 106.05 ₺ |
Stainless Steel · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.