Straight Connector Nipple
Stepped-body single-thread straight pneumatic connector nipple.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 10 variants.
| Code | Diameter (mm) | Length (mm) | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| RAKA-STC-04 | 9.2 | 19 | M4 · SW8 · ⌀2.5 | 6g | bored straight nipple |
| RAKA-STC-05 | 9.2 | 20 | M5 · SW8 · ⌀3 | 6g | bored straight nipple |
| RAKA-STC-06 | 11.5 | 24 | M6 · SW10 · ⌀4 | 6g | bored straight nipple |
| RAKA-STC-06S | 11.5 | 24 | M6 · SW10 · taper · ⌀4 | 6g | straight nipple with tapered transition |
| RAKA-STC-08 | 15 | 25 | M8 · SW13 · ⌀5.5 | 6g | bored straight nipple |
| RAKA-STC-08S | 15 | 25 | M8 · SW13 · taper · ⌀5.5 | 6g | straight nipple with tapered transition |
| RAKA-STC-10 | 19.6 | 29 | M10 · SW17 · ⌀7 | 6g | bored straight nipple |
| RAKA-STC-10S | 19.6 | 29 | M10 · SW17 · taper · ⌀7 | 6g | straight nipple with tapered transition |
| RAKA-STC-12 | 19.6 | 33 | M12 · SW17 · ⌀9 | 6g | bored straight nipple |
| RAKA-STC-12L | 19.6 | 36 | M12 · SW17 · ⌀9 | 6g | straight nipple, long bore |
Prices are for approved members.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. Deviations (mm) are given for the nominal diameter according to the ISO 286-2 tables; thread tolerances (6g/6H) are to ISO 965. For custom sizes/tolerances, contact us with the part code.
Manufacturing Scope
Straight Connector Nipple is a Fittings family precision-turned on a Goodway SW-20, covering 10 variants — diameters ⌀9.2–19.6 mm, lengths 19–36 mm, standard material Brass (also steel, stainless steel or aluminium). Every variant's part code, dimension and tolerance is listed below; request a quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is RAKA-STC-12L at 36 mm. Besides turning, the family requires thread turning (6 sizes from M4 to M12), hex flat milling (AF 8–17), taper turning and axial drilling (⌀2.5–9 mm). All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is RAKA-STC-05: 20 mm long at ⌀9.2 mm, L/D 2.2. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to 6g tolerance; the smallest is RAKA-STC-04 (⌀9.2 mm) and the largest RAKA-STC-12L (⌀19.6 mm). The family includes threaded, hex-drive, tapered, bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
Need a size that isn't listed? We machine to your drawing — CNC contract machining. How these parts are made: What is a Swiss-type lathe?
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution Tailored to Your Needs
Contact us to discuss your project; let's work out the most suitable solution together.