Spacer Sleeve
Plain-wall spacer sleeve setting distance between two bearings.
Manufacturing Scope
Spacer Sleeve is a Bearing & Seal Adapters family precision-turned on a Goodway SW-20, covering 9 variants — diameters ⌀10–20 mm, lengths 10–32 mm, standard material Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
The family is machined from ⌀20 mm bar stock; its longest variant is RULD-SPC-18 at 32 mm. The family is produced by turning alone. Bores in this family run ⌀6–18 mm. All of it is completed in a single setup, without the part leaving the machine.
The variant with the highest length-to-diameter ratio is RULD-SPC-18: 32 mm long at ⌀20 mm, L/D 1.6. A short, rigid body: what governs the result here is not deflection but diameter tolerance and surface finish.
Variants are machined to h9 tolerance; the smallest is RULD-SPC-06 (⌀10 mm) and the largest RULD-SPC-18 (⌀20 mm). The family includes bored variants. Custom sizes, tolerances or materials are produced to the part code on request.
This is a dimension schematic, not a manufacturing drawing. Dimensions match the catalog data; request a quote with the part code to confirm before production.
Code & Size Table
Code, dimensions and tolerance for all 9 variants.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std | Unit price |
|---|---|---|---|---|---|---|
| RULD-SPC-06 | ⌀10 | 10 mm | ⌀6 | h9 | Ø6 internal fit | 26.70 ₺ |
| RULD-SPC-08 | ⌀12 | 12 mm | ⌀8 | h9 | Ø8 internal fit | 28.64 ₺ |
| RULD-SPC-10 | ⌀14 | 15 mm | ⌀10 | h9 | Ø10 internal fit | 31.29 ₺ |
| RULD-SPC-12 | ⌀16 | 18 mm | ⌀12 | h9 | Ø12 internal fit | 34.12 ₺ |
| RULD-SPC-14 | ⌀17 | 20 mm | ⌀14 | h9 | Ø14 internal fit | 35.81 ₺ |
| RULD-SPC-15 | ⌀18 | 22 mm | ⌀15 | h9 | Ø15 internal fit | 37.66 ₺ |
| RULD-SPC-16 | ⌀19 | 25 mm | ⌀16 | h9 | Ø16 internal fit | 40.27 ₺ |
| RULD-SPC-17 | ⌀20 | 28 mm | ⌀17 | h9 | Ø17 internal fit | 43.45 ₺ |
| RULD-SPC-18 | ⌀20 | 32 mm | ⌀18 | h9 | Ø18 internal fit, long | 46.53 ₺ |
Steel · for 100 pcs · estimated unit price, valid 7 days · excl. VAT · Contact us for a firm quote.
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categorySimilar Parts in Other Categories
Let Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.