Reducing Sleeve
Stepped reducing sleeve adapting a shaft to a larger bore.
Manufacturing Scope
Reducing Sleeve is a Bearing & Seal Adapters family precision-turned on a Goodway SW-20, covering 8 variants — diameters ⌀14–20 mm, lengths 16–30 mm, standard material Steel (also steel, stainless, brass or aluminium). Every variant's part code, dimension and tolerance is listed below; request an instant quote with the code you need.
Variants are machined to h7 tolerance; the smallest is RULR-RED-06 (⌀14 mm) and the largest RULR-RED-17 (⌀20 mm). The family includes tapered, bored, multi-step variants. Custom sizes, tolerances or materials are produced to the part code on request.
| Code | Dia ⌀ | Length | Feature | Tolerance | Std |
|---|---|---|---|---|---|
| RULR-RED-06 | ⌀14 | 16 mm | ⌀6 · 2 steps | h7 | Ø6 mil → Ø14 yatak |
| RULR-RED-08 | ⌀15 | 18 mm | ⌀8 · 2 steps | h7 | Ø8 mil → Ø15 yatak |
| RULR-RED-10 | ⌀17 | 20 mm | ⌀10 · 2 steps | h7 | Ø10 mil → Ø17 yatak |
| RULR-RED-12 | ⌀18 | 23 mm | ⌀12 · 2 steps | h7 | Ø12 mil → Ø18 yatak |
| RULR-RED-14 | ⌀19 | 25 mm | ⌀14 · 2 steps | h7 | Ø14 mil → Ø19 yatak |
| RULR-RED-15 | ⌀20 | 27 mm | ⌀15 · 2 steps | h7 | Ø15 mil → Ø20 yatak |
| RULR-RED-16 | ⌀20 | 28 mm | taper · ⌀16 | h7 | Ø16 mil → Ø20 konik geçiş |
| RULR-RED-17 | ⌀20 | 30 mm | ⌀17 · 2 steps | h7 | Ø17 mil → Ø20 yatak |
Material & Tolerance
The standard material is listed below; also available in steel, stainless, brass and aluminium. Dimensions in mm; tolerances machined to ISO. For custom sizes/tolerances, contact us with the part code.
Other Families in This Category
Back to categoryLet Us Create a Solution
Tailored to Your Needs
Contact us to discuss your project. Let our technical team determine the most suitable solution.